--- /dev/null
+
+// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+// * Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+// * All advertising materials mentioning features or use of this
+// software must display the following acknowledgement: This product
+// includes software developed by tm3d.de and its contributors.
+// * Neither the name of tm3d.de nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#define F_CPU 8000000UL
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/wdt.h>
+#include <avr/sleep.h>
+#include <avr/pgmspace.h>
+#include "../common/I2C/USI_TWI_Master.h"
+#include "../common/I2C/SHT2x.h"
+#include "../common/I2C/BMP280.h"
+
+
+extern void OWINIT();
+
+
+
+uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/
+uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/
+uint8_t config_info1[16]={0x02,0x03, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+uint8_t config_info2[16]={0x01,0x06, 0x05,0x08, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+#if (owid>128)
+#error "Variable not correct"
+#endif
+
+extern uint8_t mode;
+extern uint8_t gcontrol;
+extern uint8_t reset_indicator;
+extern uint8_t alarmflag;
+volatile uint8_t wdcounter;
+
+
+#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
+ISR(WATCHDOG_vect) {
+#else
+ISR(WDT_vect) {
+#endif
+ //sleep_disable(); // Disable Sleep on Wakeup
+ wdcounter++;
+ if (reset_indicator==1) reset_indicator++;
+ else if (reset_indicator==2) mode=0;
+/* if (timeout==2) {
+ DIS_TIMER;
+ EN_OWINT;
+ mode=OWM_SLEEP;
+ }
+ timeout++;*/
+ //sleep_enable(); // Enable Sleep Mode
+
+}
+
+
+typedef union {
+ volatile uint8_t bytes[8];
+ struct {
+ uint16_t temp; //0
+ uint8_t TH; //2
+ uint8_t TL; //3
+ uint8_t config; //4
+ uint8_t rrFF; //5
+ uint8_t rr00; //6
+ uint8_t rr10; //7
+ };
+} pack1_t;
+volatile pack1_t pack1;
+
+
+
+typedef union {
+ #if defined(__AVR_ATtiny25__)
+ volatile uint8_t bytes[16];
+ #else
+ volatile uint8_t bytes[64];
+ #endif
+ struct {
+ uint8_t status; //1
+ int16_t temp; //2
+ uint16_t voltage; //4
+ uint16_t current; //6
+ uint8_t threshold; //8
+
+ uint8_t page1[8]; //9
+ #if defined(__AVR_ATtiny25__)
+ #else
+ uint8_t page2[8]; //17
+ uint8_t page3[8]; //25
+ uint8_t page4[8]; //33
+ uint8_t page5[8]; //41
+ uint8_t page6[8]; //49
+ uint8_t page7[8]; //57
+ //uint8_t crc; //65
+ #endif
+ };
+} pack2_t;
+volatile pack2_t pack2;
+
+
+
+
+volatile int16_t am2302_temp;
+volatile uint16_t am2302_hum;
+
+
+uint8_t userRegister[1];
+int16_t sRH,sT;
+volatile double temperatureC,humidityRH;
+volatile double l;
+ uint32_t P;
+ int32_t t;
+
+int main(void){
+ PRR|=(1<<PRADC); // adc for save Power
+ pack1.temp=0x0550;
+ pack1.config=0x7F;
+ pack1.TH=75;
+ pack1.TL=70;
+ pack1.rrFF=0xFF;
+ pack1.rr00=0;
+ pack1.rr10=0x10;
+ PORTA=0xFF;
+ PORTB=0xFF;
+ OWINIT();
+
+ MCUCR &=~(1<<PUD); //All Pins Pullup...
+ MCUCR |=(1<<BODS);
+
+ WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)
+ WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt
+ (1<<WDP2) | (1<<WDP1); // Set Timeout to ~1 seconds
+
+ MCUSR=0;
+ USI_TWI_Master_Initialise();
+ bmp280Init();
+ SHT2x_SoftReset();
+ SHT2x_ReadUserRegister(userRegister);
+ //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;
+ SHT2x_WriteUserRegister(userRegister); //write changed user reg
+ // --- measure humidity with "Hold Master Mode (HM)" ---
+ SHT2x_MeasurePoll(HUMIDITY, &sRH);
+ // --- measure temperature with "Polling Mode" (no hold master) ---
+ SHT2x_MeasurePoll(TEMP, &sT);
+ //-- calculate humidity and temperature --
+ temperatureC = SHT2x_CalcTemperatureC(sT);
+ humidityRH = SHT2x_CalcRH(sRH);
+
+ gcontrol=1;
+ sei();
+ while(1) {
+ if (wdcounter>0) {
+ SHT2x_MeasurePoll(HUMIDITY, &sRH);
+ // --- measure temperature with "Polling Mode" (no hold master) ---
+ SHT2x_MeasurePoll(TEMP, &sT);
+ //-- calculate humidity and temperature --
+ temperatureC = SHT2x_CalcTemperatureC(sT)*10.0;
+ humidityRH = SHT2x_CalcRH(sRH)*10.0;
+ double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);
+ am2302_hum=0.318*hhum +76.0;
+ am2302_temp=temperatureC*25.6;
+ wdcounter=0;
+ }
+
+ if (gcontrol==1) {
+
+ bmp280ConvertInt(&t,&P,1);
+ P=P-70000;
+ P=P/20;
+ uint16_t w=P;
+ uint8_t t8=w>>4;
+ uint8_t af=0;
+ if (t8>pack1.TH) af=1;
+ if (t8<=pack1.TL) af=1;
+ cli();
+ pack1.temp=w;
+ //pack.temp++;
+ alarmflag=af;
+ sei();
+ gcontrol=0;
+ }
+ if ((gcontrol==2)||(gcontrol==3)) {
+ gcontrol=0;
+
+ }
+
+
+#if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
+ if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))
+#endif
+#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
+ if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))
+#endif
+ {
+
+ MCUCR|=(1<<SE)|(1<<SM1);
+ MCUCR&=~(1<<ISC01);
+ } else {
+ MCUCR|=(1<<SE);
+ MCUCR&=~(1<<SM1);
+ }
+ //MCUCR&=~(1<<ISC01);
+ asm("SLEEP");
+ }
+
+
+}
\ No newline at end of file
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Atmel Studio Solution File, Format Version 11.00
+Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "DS18B20_DS2438", "DS18B20_DS2438_6_2.cproj", "{7A5672FE-8226-4158-B931-E1F36B9A8858}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|AVR = Debug|AVR
+ Release|AVR = Release|AVR
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.ActiveCfg = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.Build.0 = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.ActiveCfg = Release|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.Build.0 = Release|AVR
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectVersion>6.2</ProjectVersion>
+ <ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
+ <ProjectGuid>{7a5672fe-8226-4158-b931-e1f36b9a8858}</ProjectGuid>
+ <avrdevice>ATtiny84A</avrdevice>
+ <avrdeviceseries>none</avrdeviceseries>
+ <OutputType>Executable</OutputType>
+ <Language>C</Language>
+ <OutputFileName>$(MSBuildProjectName)</OutputFileName>
+ <OutputFileExtension>.elf</OutputFileExtension>
+ <OutputDirectory>$(MSBuildProjectDirectory)\$(Configuration)</OutputDirectory>
+ <AssemblyName>DS18B20_DS2438</AssemblyName>
+ <Name>DS18B20_DS2438</Name>
+ <RootNamespace>DS18B20_DS2438</RootNamespace>
+ <ToolchainFlavour>Native</ToolchainFlavour>
+ <KeepTimersRunning>true</KeepTimersRunning>
+ <OverrideVtor>false</OverrideVtor>
+ <CacheFlash>true</CacheFlash>
+ <ProgFlashFromRam>true</ProgFlashFromRam>
+ <RamSnippetAddress>0x20000000</RamSnippetAddress>
+ <UncachedRange />
+ <preserveEEPROM>true</preserveEEPROM>
+ <OverrideVtorValue>exception_table</OverrideVtorValue>
+ <BootSegment>2</BootSegment>
+ <eraseonlaunchrule>1</eraseonlaunchrule>
+ <AsfFrameworkConfig>
+ <framework-data xmlns="">
+ <options />
+ <configurations />
+ <files />
+ <documentation help="" />
+ <offline-documentation help="" />
+ <dependencies>
+ <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.19.0" />
+ </dependencies>
+ </framework-data>
+ </AsfFrameworkConfig>
+ <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
+ <com_atmel_avrdbg_tool_atmelice>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>debugWIRE</InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.atmelice</ToolType>
+ <ToolNumber>J41800000779</ToolNumber>
+ <ToolName>Atmel-ICE</ToolName>
+ </com_atmel_avrdbg_tool_atmelice>
+ <avrtoolinterface>debugWIRE</avrtoolinterface>
+ <com_atmel_avrdbg_tool_simulator>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>
+ </InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.simulator</ToolType>
+ <ToolNumber>
+ </ToolNumber>
+ <ToolName>Simulator</ToolName>
+ </com_atmel_avrdbg_tool_simulator>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>NDEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.optimization.level>Optimize for size (-Os)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="..\common\I2C\SHT2x.c">
+ <SubType>compile</SubType>
+ <Link>SHT2x.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\MAX44009.c">
+ <SubType>compile</SubType>
+ <Link>MAX44009.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\USI_TWI_Master.c">
+ <SubType>compile</SubType>
+ <Link>USI_TWI_Master.c</Link>
+ </Compile>
+ <Compile Include="DS18B20_DS2438.c">
+ <SubType>compile</SubType>
+ </Compile>
+ <Compile Include="OWDS18B20_DS2438.S">
+ <SubType>compile</SubType>
+ </Compile>
+ </ItemGroup>
+ <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />
+</Project>
\ No newline at end of file
--- /dev/null
+
+// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+// * Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+// * All advertising materials mentioning features or use of this
+// software must display the following acknowledgement: This product
+// includes software developed by tm3d.de and its contributors.
+// * Neither the name of tm3d.de nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#define _CHANGEABLE_ID_
+#define _ZERO_POLLING_
+#define _DB_
+
+#include "../common/OWConfig.s"
+#include "../common/OWCRC8.s"
+
+.extern pack1,8
+
+//.extern am2302_temp,2
+
+#if defined(__AVR_ATtiny25__)
+.extern pack2,16
+#else
+.extern pack2,64
+#endif
+.extern am2302_temp,2
+.extern am2302_hum,2
+.comm block,1 ; Block der augegeben, geschrieben wird (Parameter von READ/WRITE Scratchpad)
+
+
+.macro CHIP_INIT
+Init_EEPROM_read:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp Init_EEPROM_read
+ ldi r_temp,0
+ out _SFR_IO_ADDR(EEARH), r_temp
+ ldi r_temp,2
+ out _SFR_IO_ADDR(EEARL), r_temp
+ sbi _SFR_IO_ADDR(EECR), EERE
+ in r_temp,_SFR_IO_ADDR(EEDR)
+ sbrs r_temp,7
+ rcall hrc_recall_eeprom_func1
+.endm
+
+.macro COMMAND_TABLE
+ rjmp h_readscratchpad1
+ rjmp h_writescratchpad1
+ rjmp h_readscratchpad_adr2
+ rjmp h_readscratchpad2
+ rjmp h_writescratchpad_adr2
+ rjmp h_writescratchpad2
+.endm
+
+#include "../common/OWRomFunctionsDual.s"
+#include "../common/OWTimerInterrupt.s"
+
+
+
+; Ab hier Geraeteabhaenging
+#define OW_READ_SCRATCHPAD1 OW_FIRST_COMMAND+0
+#define OW_WRITE_SCRATCHPAD1 OW_FIRST_COMMAND+1
+#define OW_READ_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+2
+#define OW_READ_SCRATCHPAD2 OW_FIRST_COMMAND+3
+#define OW_WRITE_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+4
+#define OW_WRITE_SCRATCHPAD2 OW_FIRST_COMMAND+5
+
+
+;---------------------------------------------------
+; READ COMMAND and start operation
+;---------------------------------------------------
+
+
+h_readcommand1:
+ clr r_bytep
+#ifndef _DIS_FLASH_
+ FLASH_COMMANDS ; muss zu erst sein....
+#endif
+ cjmp 0xBE,hrc_set_readscratchpad1
+ cjmp 0x4E,hrc_set_writescratchpad1
+ cjmp 0x44,hrc_set_convertT1
+ cjmp 0x48,hrc_copy_scratchpad1
+ cjmp 0xB8,hrc_recall_eeprom1
+ FW_CONFIG_INFO1
+#ifdef _CHANGEABLE_ID_
+ CHANGE_ID_COMMANDS
+#endif
+ ldi r_mode,OW_SLEEP
+ rjmp handle_end
+
+hrc_set_readscratchpad1:
+ ldi r_mode,OW_READ_SCRATCHPAD1
+ ldi r_sendflag,1
+ CRCInit2
+ rjmp h_readscratchpad1
+
+hrc_set_writescratchpad1:
+ ldi r_mode,OW_WRITE_SCRATCHPAD1
+ ldi r_bytep,2 ;start to write in 2
+ rjmp handle_end
+
+hrc_recall_eeprom1:
+ rcall hrc_recall_eeprom_func1
+ rjmp handle_end
+
+
+
+hrc_set_convertT1:
+ ldi r_temp,1
+ sts gcontrol,r_temp
+
+ rjmp handle_end_sleep
+
+
+hrc_copy_scratchpad1:
+ ldi r_bytep,2
+ configZ pack1,r_bytep
+ clr r_bytep
+hrc_copy_scratchpad_EEPROM_write1:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp hrc_copy_scratchpad_EEPROM_write1
+ ldi r_temp, (0<<EEPM1)|(0<<EEPM0)
+ out _SFR_IO_ADDR(EECR), r_temp
+ ldi r_temp,0
+ out _SFR_IO_ADDR(EEARH),r_temp
+ out _SFR_IO_ADDR(EEARL), r_bytep
+ ld r_rwbyte,Z+
+ out _SFR_IO_ADDR(EEDR), r_rwbyte
+ sbi _SFR_IO_ADDR(EECR), EEMPE
+ sbi _SFR_IO_ADDR(EECR), EEPE
+ inc r_bytep
+ cpi r_bytep,3
+ brne hrc_copy_scratchpad_EEPROM_write1
+ rjmp handle_end
+
+
+hrc_recall_eeprom_func1:
+ ldi r_bytep,2
+ configZ pack1,r_bytep
+ clr r_bytep
+ clr r_temp
+hrc_recall_eeprom_EEPROM_read1:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp hrc_recall_eeprom_EEPROM_read1
+ out _SFR_IO_ADDR(EEARH), r_temp
+ out _SFR_IO_ADDR(EEARL), r_bytep
+ sbi _SFR_IO_ADDR(EECR), EERE
+ in r_rwbyte,_SFR_IO_ADDR(EEDR)
+ st Z+,r_rwbyte
+ inc r_bytep
+ cpi r_bytep,3
+ brne hrc_recall_eeprom_EEPROM_read1
+ ret
+
+
+
+
+
+
+;---------------------------------------------------
+; READ SCRATCHPAD
+;---------------------------------------------------
+
+h_readscratchpad1:
+ cpi r_bytep,8
+ breq h_readscratchpad_crc1
+ cpi r_bytep,9
+ breq h_readscratchpad_all1
+ configZ pack1,r_bytep
+ ld r_rwbyte,Z
+ rjmp h_readscratchpad_endc1
+h_readscratchpad_crc1:
+ lds r_rwbyte,crc
+h_readscratchpad_endc1:
+ inc r_bytep
+ ldi r_bcount,1
+ rjmp handle_end
+h_readscratchpad_all1:
+ rjmp handle_end_sleep
+
+
+
+
+
+;---------------------------------------------------
+; WRITE SCRATCHPAD
+;---------------------------------------------------
+
+h_writescratchpad1:
+ configZ pack1,r_bytep
+ inc r_bytep
+ cpi r_bytep,5
+ breq h_writescratchpad_all1
+ st Z,r_rwbyte
+ rjmp handle_end
+h_writescratchpad_all1:
+ ori r_rwbyte,0x1F ; Alle unteren Bits sind immer 1
+ st Z,r_rwbyte
+ rjmp handle_end_sleep
+
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+
+
+
+
+
+h_readcommand2:
+ clr r_bytep
+#ifndef _DIS_FLASH_
+ FLASH_COMMANDS ; muss zu erst sein....
+#endif
+ cset 0xBE,OW_READ_SCRATCHPAD_ADR2
+ cset 0x4E,OW_WRITE_SCRATCHPAD_ADR2
+ cjmp 0x44,hrc_set_convertT2
+ cjmp 0xB4,hrc_set_convertV2
+ FW_CONFIG_INFO2
+#ifdef _CHANGEABLE_ID_
+ CHANGE_ID_COMMANDS
+#endif
+ rjmp handle_end_sleep
+
+
+hrc_set_convertT2:
+ ldi r_temp,2
+ sts gcontrol,r_temp
+ lds r_temp,am2302_temp
+ sts pack2+1,r_temp
+ lds r_temp,am2302_temp+1
+ sts pack2+2,r_temp
+ rjmp handle_end_sleep
+hrc_set_convertV2:
+ lds r_temp,pack2
+ sbrs r_temp,3
+ rjmp hrc_set_convertVV2
+ ldi r_temp,0xF4
+ sts pack2+3,r_temp
+ ldi r_temp,0x01
+ sts pack2+4,r_temp
+ rjmp hrc_set_convertend2
+hrc_set_convertVV2:
+ ldi r_temp,3
+ sts gcontrol,r_temp
+ lds r_temp,am2302_hum
+ sts pack2+3,r_temp
+ lds r_temp,am2302_hum+1
+ sts pack2+4,r_temp
+hrc_set_convertend2:
+ rjmp handle_end_sleep
+
+
+
+;---------------------------------------------------
+; READ SCRATCHPAD
+;---------------------------------------------------
+
+h_readscratchpad_adr2:
+ lsl r_rwbyte
+ lsl r_rwbyte
+ lsl r_rwbyte
+#if defined(__AVR_ATtiny25__)
+ andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
+#endif
+ sts block,r_rwbyte
+ ldi r_sendflag,1
+ ldi r_mode,OW_READ_SCRATCHPAD2
+ CRCInit2
+h_readscratchpad2:
+ cpi r_bytep,8
+ breq h_readscratchpad_crc2
+ cpi r_bytep,9
+ breq h_readscratchpad_all2
+ lds r_temp,block
+ add r_temp,r_bytep
+ configZ pack2,r_temp
+ ld r_rwbyte,Z
+ rjmp handle_end_inc
+h_readscratchpad_crc2:
+ lds r_rwbyte,crc
+ rjmp handle_end_inc
+h_readscratchpad_all2:
+ rjmp handle_end_sleep
+
+
+
+
+;---------------------------------------------------
+; WRITE SCRATCHPAD
+;---------------------------------------------------
+h_writescratchpad_adr2:
+ lsl r_rwbyte
+ lsl r_rwbyte
+ lsl r_rwbyte
+#if defined(__AVR_ATtiny25__)
+ andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
+#endif
+ sts block,r_rwbyte
+ ldi r_mode,OW_WRITE_SCRATCHPAD2
+ ldi r_bcount,1
+ rjmp handle_end
+h_writescratchpad2:
+ cpi r_bytep,8
+ breq h_writescratchpad_all2
+ lds r_temp,block
+ add r_temp,r_bytep
+ configZ pack2,r_temp
+ st Z,r_rwbyte
+ rjmp handle_end_inc
+h_writescratchpad_all2:
+ rjmp handle_end_sleep
+
+
+
+
+
+
+
+
+
+#include "../common/OWPinInterrupt.s"
+.end
\ No newline at end of file
+++ /dev/null
-
-Microsoft Visual Studio Solution File, Format Version 11.00
-# Atmel Studio Solution File, Format Version 11.00
-Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "DS18B20_DS2438", "DS18B20_DS2438.cproj", "{7A5672FE-8226-4158-B931-E1F36B9A8858}"
-EndProject
-Global
- GlobalSection(SolutionConfigurationPlatforms) = preSolution
- Debug|AVR = Debug|AVR
- Release|AVR = Release|AVR
- EndGlobalSection
- GlobalSection(ProjectConfigurationPlatforms) = postSolution
- {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.ActiveCfg = Debug|AVR
- {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.Build.0 = Debug|AVR
- {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.ActiveCfg = Release|AVR
- {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.Build.0 = Release|AVR
- EndGlobalSection
- GlobalSection(SolutionProperties) = preSolution
- HideSolutionNode = FALSE
- EndGlobalSection
-EndGlobal
+++ /dev/null
-
-// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-// * Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the
-// distribution.
-// * All advertising materials mentioning features or use of this
-// software must display the following acknowledgement: This product
-// includes software developed by tm3d.de and its contributors.
-// * Neither the name of tm3d.de nor the names of its contributors may
-// be used to endorse or promote products derived from this software
-// without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#define F_CPU 8000000UL
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/wdt.h>
-#include <avr/sleep.h>
-#include <avr/pgmspace.h>
-#include "../common/I2C/USI_TWI_Master.h"
-#include "../common/I2C/MAX44009.h"
-#include "../common/I2C/SHT2x.h"
-
-
-extern void OWINIT();
-
-
-
-uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/
-uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/
-uint8_t config_info1[16]={0x03,0x04, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-uint8_t config_info2[16]={0x01,0x06, 0x05,0x00, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
-#if (owid>128)
-#error "Variable not correct"
-#endif
-
-extern uint8_t mode;
-extern uint8_t gcontrol;
-extern uint8_t reset_indicator;
-extern uint8_t alarmflag;
-volatile uint8_t wdcounter;
-
-
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
-ISR(WATCHDOG_vect) {
-#else
-ISR(WDT_vect) {
-#endif
- //sleep_disable(); // Disable Sleep on Wakeup
- wdcounter++;
- if (reset_indicator==1) reset_indicator++;
- else if (reset_indicator==2) mode=0;
-/* if (timeout==2) {
- DIS_TIMER;
- EN_OWINT;
- mode=OWM_SLEEP;
- }
- timeout++;*/
- //sleep_enable(); // Enable Sleep Mode
-
-}
-
-
-typedef union {
- volatile uint8_t bytes[8];
- struct {
- uint16_t temp; //0
- uint8_t TH; //2
- uint8_t TL; //3
- uint8_t config; //4
- uint8_t rrFF; //5
- uint8_t rr00; //6
- uint8_t rr10; //7
- };
-} pack1_t;
-volatile pack1_t pack1;
-
-
-
-typedef union {
- #if defined(__AVR_ATtiny25__)
- volatile uint8_t bytes[16];
- #else
- volatile uint8_t bytes[64];
- #endif
- struct {
- uint8_t status; //1
- int16_t temp; //2
- uint16_t voltage; //4
- uint16_t current; //6
- uint8_t threshold; //8
-
- uint8_t page1[8]; //9
- #if defined(__AVR_ATtiny25__)
- #else
- uint8_t page2[8]; //17
- uint8_t page3[8]; //25
- uint8_t page4[8]; //33
- uint8_t page5[8]; //41
- uint8_t page6[8]; //49
- uint8_t page7[8]; //57
- //uint8_t crc; //65
- #endif
- };
-} pack2_t;
-volatile pack2_t pack2;
-
-
-
-
-volatile int16_t am2302_temp;
-volatile uint16_t am2302_hum;
-
-
-uint8_t userRegister[1];
-int16_t sRH,sT;
-volatile double temperatureC,humidityRH;
-volatile double l;
-
-
-int main(void){
- PRR|=(1<<PRADC); // adc for save Power
- pack1.temp=0x0550;
- pack1.config=0x7F;
- pack1.TH=75;
- pack1.TL=70;
- pack1.rrFF=0xFF;
- pack1.rr00=0;
- pack1.rr10=0x10;
- PORTA=0xFF;
- PORTB=0xFF;
- OWINIT();
-
- MCUCR &=~(1<<PUD); //All Pins Pullup...
- MCUCR |=(1<<BODS);
-
- WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)
- WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt
- (1<<WDP2) | (1<<WDP1); // Set Timeout to ~1 seconds
-
- MCUSR=0;
- USI_TWI_Master_Initialise();
- SHT2x_SoftReset();
- SHT2x_ReadUserRegister(userRegister);
- //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;
- SHT2x_WriteUserRegister(userRegister); //write changed user reg
- // --- measure humidity with "Hold Master Mode (HM)" ---
- SHT2x_MeasurePoll(HUMIDITY, &sRH);
- // --- measure temperature with "Polling Mode" (no hold master) ---
- SHT2x_MeasurePoll(TEMP, &sT);
- //-- calculate humidity and temperature --
- temperatureC = SHT2x_CalcTemperatureC(sT);
- humidityRH = SHT2x_CalcRH(sRH);
-
- gcontrol=1;
- sei();
- while(1) {
- if (wdcounter>0) {
- SHT2x_MeasurePoll(HUMIDITY, &sRH);
- // --- measure temperature with "Polling Mode" (no hold master) ---
- SHT2x_MeasurePoll(TEMP, &sT);
- //-- calculate humidity and temperature --
- temperatureC = SHT2x_CalcTemperatureC(sT)*10.0;
- humidityRH = SHT2x_CalcRH(sRH)*10.0;
- double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);
- am2302_hum=0.318*hhum +76.0;
- am2302_temp=temperatureC*25.6;
- wdcounter=0;
- }
-
- if (gcontrol==1) {
- l=MAX44009getlux();
- if (l<0.030) l=0.030; //Darf nicht 0 sein. minimum -35°C Sensor minimum 0.045
- //double l=1000;
- l=log(l)*10*16;
- uint16_t w=l;
- uint8_t t8=w>>4;
- uint8_t af=0;
- if (t8>pack1.TH) af=1;
- if (t8<=pack1.TL) af=1;
- cli();
- pack1.temp=w;
- //pack.temp++;
- alarmflag=af;
- sei();
- gcontrol=0;
- }
- if ((gcontrol==2)||(gcontrol==3)) {
- gcontrol=0;
-
- }
-
-
-#if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
- if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))
-#endif
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
- if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))
-#endif
- {
-
- MCUCR|=(1<<SE)|(1<<SM1);
- MCUCR&=~(1<<ISC01);
- } else {
- MCUCR|=(1<<SE);
- MCUCR&=~(1<<SM1);
- }
- //MCUCR&=~(1<<ISC01);
- asm("SLEEP");
- }
-
-
-}
\ No newline at end of file
+++ /dev/null
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup>
- <SchemaVersion>2.0</SchemaVersion>
- <ProjectVersion>6.2</ProjectVersion>
- <ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
- <ProjectGuid>{7a5672fe-8226-4158-b931-e1f36b9a8858}</ProjectGuid>
- <avrdevice>ATtiny84A</avrdevice>
- <avrdeviceseries>none</avrdeviceseries>
- <OutputType>Executable</OutputType>
- <Language>C</Language>
- <OutputFileName>$(MSBuildProjectName)</OutputFileName>
- <OutputFileExtension>.elf</OutputFileExtension>
- <OutputDirectory>$(MSBuildProjectDirectory)\$(Configuration)</OutputDirectory>
- <AssemblyName>DS18B20_DS2438</AssemblyName>
- <Name>DS18B20_DS2438</Name>
- <RootNamespace>DS18B20_DS2438</RootNamespace>
- <ToolchainFlavour>Native</ToolchainFlavour>
- <KeepTimersRunning>true</KeepTimersRunning>
- <OverrideVtor>false</OverrideVtor>
- <CacheFlash>true</CacheFlash>
- <ProgFlashFromRam>true</ProgFlashFromRam>
- <RamSnippetAddress>0x20000000</RamSnippetAddress>
- <UncachedRange />
- <preserveEEPROM>true</preserveEEPROM>
- <OverrideVtorValue>exception_table</OverrideVtorValue>
- <BootSegment>2</BootSegment>
- <eraseonlaunchrule>1</eraseonlaunchrule>
- <AsfFrameworkConfig>
- <framework-data xmlns="">
- <options />
- <configurations />
- <files />
- <documentation help="" />
- <offline-documentation help="" />
- <dependencies>
- <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.19.0" />
- </dependencies>
- </framework-data>
- </AsfFrameworkConfig>
- <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
- <com_atmel_avrdbg_tool_atmelice>
- <ToolOptions>
- <InterfaceProperties>
- </InterfaceProperties>
- <InterfaceName>debugWIRE</InterfaceName>
- </ToolOptions>
- <ToolType>com.atmel.avrdbg.tool.atmelice</ToolType>
- <ToolNumber>J41800000779</ToolNumber>
- <ToolName>Atmel-ICE</ToolName>
- </com_atmel_avrdbg_tool_atmelice>
- <avrtoolinterface>debugWIRE</avrtoolinterface>
- <com_atmel_avrdbg_tool_simulator>
- <ToolOptions>
- <InterfaceProperties>
- </InterfaceProperties>
- <InterfaceName>
- </InterfaceName>
- </ToolOptions>
- <ToolType>com.atmel.avrdbg.tool.simulator</ToolType>
- <ToolNumber>
- </ToolNumber>
- <ToolName>Simulator</ToolName>
- </com_atmel_avrdbg_tool_simulator>
- </PropertyGroup>
- <PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
- <ToolchainSettings>
- <AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>NDEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize for size (-Os)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- </AvrGcc>
- </ToolchainSettings>
- </PropertyGroup>
- <PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
- <ToolchainSettings>
- <AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>DEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
- </AvrGcc>
- </ToolchainSettings>
- </PropertyGroup>
- <ItemGroup>
- <Compile Include="..\common\I2C\SHT2x.c">
- <SubType>compile</SubType>
- <Link>SHT2x.c</Link>
- </Compile>
- <Compile Include="D:\oc\dev\owSlave2\common\I2C\MAX44009.c">
- <SubType>compile</SubType>
- <Link>MAX44009.c</Link>
- </Compile>
- <Compile Include="D:\oc\dev\owSlave2\common\I2C\USI_TWI_Master.c">
- <SubType>compile</SubType>
- <Link>USI_TWI_Master.c</Link>
- </Compile>
- <Compile Include="DS18B20_DS2438.c">
- <SubType>compile</SubType>
- </Compile>
- <Compile Include="OWDS18B20_DS2438.S">
- <SubType>compile</SubType>
- </Compile>
- </ItemGroup>
- <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />
-</Project>
\ No newline at end of file
+++ /dev/null
-
-// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-// * Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the
-// distribution.
-// * All advertising materials mentioning features or use of this
-// software must display the following acknowledgement: This product
-// includes software developed by tm3d.de and its contributors.
-// * Neither the name of tm3d.de nor the names of its contributors may
-// be used to endorse or promote products derived from this software
-// without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#define _CHANGEABLE_ID_
-#define _ZERO_POLLING_
-#define _DB_
-
-#include "../common/OWConfig.s"
-#include "../common/OWCRC8.s"
-
-.extern pack1,8
-
-//.extern am2302_temp,2
-
-#if defined(__AVR_ATtiny25__)
-.extern pack2,16
-#else
-.extern pack2,64
-#endif
-.extern am2302_temp,2
-.extern am2302_hum,2
-.comm block,1 ; Block der augegeben, geschrieben wird (Parameter von READ/WRITE Scratchpad)
-
-
-.macro CHIP_INIT
-Init_EEPROM_read:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp Init_EEPROM_read
- ldi r_temp,0
- out _SFR_IO_ADDR(EEARH), r_temp
- ldi r_temp,2
- out _SFR_IO_ADDR(EEARL), r_temp
- sbi _SFR_IO_ADDR(EECR), EERE
- in r_temp,_SFR_IO_ADDR(EEDR)
- sbrs r_temp,7
- rcall hrc_recall_eeprom_func1
-.endm
-
-.macro COMMAND_TABLE
- rjmp h_readscratchpad1
- rjmp h_writescratchpad1
- rjmp h_readscratchpad_adr2
- rjmp h_readscratchpad2
- rjmp h_writescratchpad_adr2
- rjmp h_writescratchpad2
-.endm
-
-#include "../common/OWRomFunctionsDual.s"
-#include "../common/OWTimerInterrupt.s"
-
-
-
-; Ab hier Geraeteabhaenging
-#define OW_READ_SCRATCHPAD1 OW_FIRST_COMMAND+0
-#define OW_WRITE_SCRATCHPAD1 OW_FIRST_COMMAND+1
-#define OW_READ_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+2
-#define OW_READ_SCRATCHPAD2 OW_FIRST_COMMAND+3
-#define OW_WRITE_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+4
-#define OW_WRITE_SCRATCHPAD2 OW_FIRST_COMMAND+5
-
-
-;---------------------------------------------------
-; READ COMMAND and start operation
-;---------------------------------------------------
-
-
-h_readcommand1:
- clr r_bytep
-#ifndef _DIS_FLASH_
- FLASH_COMMANDS ; muss zu erst sein....
-#endif
- cjmp 0xBE,hrc_set_readscratchpad1
- cjmp 0x4E,hrc_set_writescratchpad1
- cjmp 0x44,hrc_set_convertT1
- cjmp 0x48,hrc_copy_scratchpad1
- cjmp 0xB8,hrc_recall_eeprom1
- FW_CONFIG_INFO1
-#ifdef _CHANGEABLE_ID_
- CHANGE_ID_COMMANDS
-#endif
- ldi r_mode,OW_SLEEP
- rjmp handle_end
-
-hrc_set_readscratchpad1:
- ldi r_mode,OW_READ_SCRATCHPAD1
- ldi r_sendflag,1
- CRCInit2
- rjmp h_readscratchpad1
-
-hrc_set_writescratchpad1:
- ldi r_mode,OW_WRITE_SCRATCHPAD1
- ldi r_bytep,2 ;start to write in 2
- rjmp handle_end
-
-hrc_recall_eeprom1:
- rcall hrc_recall_eeprom_func1
- rjmp handle_end
-
-
-
-hrc_set_convertT1:
- ldi r_temp,1
- sts gcontrol,r_temp
-
- rjmp handle_end_sleep
-
-
-hrc_copy_scratchpad1:
- ldi r_bytep,2
- configZ pack1,r_bytep
- clr r_bytep
-hrc_copy_scratchpad_EEPROM_write1:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp hrc_copy_scratchpad_EEPROM_write1
- ldi r_temp, (0<<EEPM1)|(0<<EEPM0)
- out _SFR_IO_ADDR(EECR), r_temp
- ldi r_temp,0
- out _SFR_IO_ADDR(EEARH),r_temp
- out _SFR_IO_ADDR(EEARL), r_bytep
- ld r_rwbyte,Z+
- out _SFR_IO_ADDR(EEDR), r_rwbyte
- sbi _SFR_IO_ADDR(EECR), EEMPE
- sbi _SFR_IO_ADDR(EECR), EEPE
- inc r_bytep
- cpi r_bytep,3
- brne hrc_copy_scratchpad_EEPROM_write1
- rjmp handle_end
-
-
-hrc_recall_eeprom_func1:
- ldi r_bytep,2
- configZ pack1,r_bytep
- clr r_bytep
- clr r_temp
-hrc_recall_eeprom_EEPROM_read1:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp hrc_recall_eeprom_EEPROM_read1
- out _SFR_IO_ADDR(EEARH), r_temp
- out _SFR_IO_ADDR(EEARL), r_bytep
- sbi _SFR_IO_ADDR(EECR), EERE
- in r_rwbyte,_SFR_IO_ADDR(EEDR)
- st Z+,r_rwbyte
- inc r_bytep
- cpi r_bytep,3
- brne hrc_recall_eeprom_EEPROM_read1
- ret
-
-
-
-
-
-
-;---------------------------------------------------
-; READ SCRATCHPAD
-;---------------------------------------------------
-
-h_readscratchpad1:
- cpi r_bytep,8
- breq h_readscratchpad_crc1
- cpi r_bytep,9
- breq h_readscratchpad_all1
- configZ pack1,r_bytep
- ld r_rwbyte,Z
- rjmp h_readscratchpad_endc1
-h_readscratchpad_crc1:
- lds r_rwbyte,crc
-h_readscratchpad_endc1:
- inc r_bytep
- ldi r_bcount,1
- rjmp handle_end
-h_readscratchpad_all1:
- rjmp handle_end_sleep
-
-
-
-
-
-;---------------------------------------------------
-; WRITE SCRATCHPAD
-;---------------------------------------------------
-
-h_writescratchpad1:
- configZ pack1,r_bytep
- inc r_bytep
- cpi r_bytep,5
- breq h_writescratchpad_all1
- st Z,r_rwbyte
- rjmp handle_end
-h_writescratchpad_all1:
- ori r_rwbyte,0x1F ; Alle unteren Bits sind immer 1
- st Z,r_rwbyte
- rjmp handle_end_sleep
-
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-
-
-
-
-
-h_readcommand2:
- clr r_bytep
-#ifndef _DIS_FLASH_
- FLASH_COMMANDS ; muss zu erst sein....
-#endif
- cset 0xBE,OW_READ_SCRATCHPAD_ADR2
- cset 0x4E,OW_WRITE_SCRATCHPAD_ADR2
- cjmp 0x44,hrc_set_convertT2
- cjmp 0xB4,hrc_set_convertV2
- FW_CONFIG_INFO2
-#ifdef _CHANGEABLE_ID_
- CHANGE_ID_COMMANDS
-#endif
- rjmp handle_end_sleep
-
-
-hrc_set_convertT2:
- ldi r_temp,2
- sts gcontrol,r_temp
- lds r_temp,am2302_temp
- sts pack2+1,r_temp
- lds r_temp,am2302_temp+1
- sts pack2+2,r_temp
- rjmp handle_end_sleep
-hrc_set_convertV2:
- lds r_temp,pack2
- sbrs r_temp,3
- rjmp hrc_set_convertVV2
- ldi r_temp,0xF4
- sts pack2+3,r_temp
- ldi r_temp,0x01
- sts pack2+4,r_temp
- rjmp hrc_set_convertend2
-hrc_set_convertVV2:
- ldi r_temp,3
- sts gcontrol,r_temp
- lds r_temp,am2302_hum
- sts pack2+3,r_temp
- lds r_temp,am2302_hum+1
- sts pack2+4,r_temp
-hrc_set_convertend2:
- rjmp handle_end_sleep
-
-
-
-;---------------------------------------------------
-; READ SCRATCHPAD
-;---------------------------------------------------
-
-h_readscratchpad_adr2:
- lsl r_rwbyte
- lsl r_rwbyte
- lsl r_rwbyte
-#if defined(__AVR_ATtiny25__)
- andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
-#endif
- sts block,r_rwbyte
- ldi r_sendflag,1
- ldi r_mode,OW_READ_SCRATCHPAD2
- CRCInit2
-h_readscratchpad2:
- cpi r_bytep,8
- breq h_readscratchpad_crc2
- cpi r_bytep,9
- breq h_readscratchpad_all2
- lds r_temp,block
- add r_temp,r_bytep
- configZ pack2,r_temp
- ld r_rwbyte,Z
- rjmp handle_end_inc
-h_readscratchpad_crc2:
- lds r_rwbyte,crc
- rjmp handle_end_inc
-h_readscratchpad_all2:
- rjmp handle_end_sleep
-
-
-
-
-;---------------------------------------------------
-; WRITE SCRATCHPAD
-;---------------------------------------------------
-h_writescratchpad_adr2:
- lsl r_rwbyte
- lsl r_rwbyte
- lsl r_rwbyte
-#if defined(__AVR_ATtiny25__)
- andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
-#endif
- sts block,r_rwbyte
- ldi r_mode,OW_WRITE_SCRATCHPAD2
- ldi r_bcount,1
- rjmp handle_end
-h_writescratchpad2:
- cpi r_bytep,8
- breq h_writescratchpad_all2
- lds r_temp,block
- add r_temp,r_bytep
- configZ pack2,r_temp
- st Z,r_rwbyte
- rjmp handle_end_inc
-h_writescratchpad_all2:
- rjmp handle_end_sleep
-
-
-
-
-
-
-
-
-
-#include "../common/OWPinInterrupt.s"
-.end
\ No newline at end of file
--- /dev/null
+
+// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+// * Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+// * All advertising materials mentioning features or use of this
+// software must display the following acknowledgement: This product
+// includes software developed by tm3d.de and its contributors.
+// * Neither the name of tm3d.de nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#define F_CPU 8000000UL
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/wdt.h>
+#include <avr/sleep.h>
+#include <avr/pgmspace.h>
+#include "../common/I2C/USI_TWI_Master.h"
+#include "../common/I2C/MAX44009.h"
+#include "../common/I2C/SHT2x.h"
+
+
+extern void OWINIT();
+
+
+
+uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/
+uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/
+uint8_t config_info1[16]={0x03,0x04, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+uint8_t config_info2[16]={0x01,0x06, 0x05,0x08, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+#if (owid>128)
+#error "Variable not correct"
+#endif
+
+extern uint8_t mode;
+extern uint8_t gcontrol;
+extern uint8_t reset_indicator;
+extern uint8_t alarmflag;
+volatile uint8_t wdcounter;
+
+
+#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
+ISR(WATCHDOG_vect) {
+#else
+ISR(WDT_vect) {
+#endif
+ //sleep_disable(); // Disable Sleep on Wakeup
+ wdcounter++;
+ if (reset_indicator==1) reset_indicator++;
+ else if (reset_indicator==2) mode=0;
+/* if (timeout==2) {
+ DIS_TIMER;
+ EN_OWINT;
+ mode=OWM_SLEEP;
+ }
+ timeout++;*/
+ //sleep_enable(); // Enable Sleep Mode
+
+}
+
+
+typedef union {
+ volatile uint8_t bytes[8];
+ struct {
+ uint16_t temp; //0
+ uint8_t TH; //2
+ uint8_t TL; //3
+ uint8_t config; //4
+ uint8_t rrFF; //5
+ uint8_t rr00; //6
+ uint8_t rr10; //7
+ };
+} pack1_t;
+volatile pack1_t pack1;
+
+
+
+typedef union {
+ #if defined(__AVR_ATtiny25__)
+ volatile uint8_t bytes[16];
+ #else
+ volatile uint8_t bytes[64];
+ #endif
+ struct {
+ uint8_t status; //1
+ int16_t temp; //2
+ uint16_t voltage; //4
+ uint16_t current; //6
+ uint8_t threshold; //8
+
+ uint8_t page1[8]; //9
+ #if defined(__AVR_ATtiny25__)
+ #else
+ uint8_t page2[8]; //17
+ uint8_t page3[8]; //25
+ uint8_t page4[8]; //33
+ uint8_t page5[8]; //41
+ uint8_t page6[8]; //49
+ uint8_t page7[8]; //57
+ //uint8_t crc; //65
+ #endif
+ };
+} pack2_t;
+volatile pack2_t pack2;
+
+
+
+
+volatile int16_t am2302_temp;
+volatile uint16_t am2302_hum;
+
+
+uint8_t userRegister[1];
+int16_t sRH,sT;
+volatile double temperatureC,humidityRH;
+volatile double l;
+
+
+int main(void){
+ PRR|=(1<<PRADC); // adc for save Power
+ pack1.temp=0x0550;
+ pack1.config=0x7F;
+ pack1.TH=75;
+ pack1.TL=70;
+ pack1.rrFF=0xFF;
+ pack1.rr00=0;
+ pack1.rr10=0x10;
+ PORTA=0xFF;
+ PORTB=0xFF;
+ OWINIT();
+
+ MCUCR &=~(1<<PUD); //All Pins Pullup...
+ MCUCR |=(1<<BODS);
+
+ WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)
+ WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt
+ (1<<WDP2) | (1<<WDP1); // Set Timeout to ~1 seconds
+
+ MCUSR=0;
+ USI_TWI_Master_Initialise();
+ SHT2x_SoftReset();
+ SHT2x_ReadUserRegister(userRegister);
+ //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;
+ SHT2x_WriteUserRegister(userRegister); //write changed user reg
+ // --- measure humidity with "Hold Master Mode (HM)" ---
+ SHT2x_MeasurePoll(HUMIDITY, &sRH);
+ // --- measure temperature with "Polling Mode" (no hold master) ---
+ SHT2x_MeasurePoll(TEMP, &sT);
+ //-- calculate humidity and temperature --
+ temperatureC = SHT2x_CalcTemperatureC(sT);
+ humidityRH = SHT2x_CalcRH(sRH);
+
+ gcontrol=1;
+ sei();
+ while(1) {
+ if (wdcounter>0) {
+ SHT2x_MeasurePoll(HUMIDITY, &sRH);
+ // --- measure temperature with "Polling Mode" (no hold master) ---
+ SHT2x_MeasurePoll(TEMP, &sT);
+ //-- calculate humidity and temperature --
+ temperatureC = SHT2x_CalcTemperatureC(sT)*10.0;
+ humidityRH = SHT2x_CalcRH(sRH)*10.0;
+ double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);
+ am2302_hum=0.318*hhum +76.0;
+ am2302_temp=temperatureC*25.6;
+ wdcounter=0;
+ }
+
+ if (gcontrol==1) {
+ l=MAX44009getlux(0);
+ if (l<0.030) l=0.030; //Darf nicht 0 sein. minimum -35°C Sensor minimum 0.045
+ //double l=1000;
+ l=log(l)*10*16;
+ uint16_t w=l;
+ uint8_t t8=w>>4;
+ uint8_t af=0;
+ if (t8>pack1.TH) af=1;
+ if (t8<=pack1.TL) af=1;
+ cli();
+ pack1.temp=w;
+ //pack.temp++;
+ alarmflag=af;
+ sei();
+ gcontrol=0;
+ }
+ if ((gcontrol==2)||(gcontrol==3)) {
+ gcontrol=0;
+
+ }
+
+
+#if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
+ if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))
+#endif
+#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
+ if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))
+#endif
+ {
+
+ MCUCR|=(1<<SE)|(1<<SM1);
+ MCUCR&=~(1<<ISC01);
+ } else {
+ MCUCR|=(1<<SE);
+ MCUCR&=~(1<<SM1);
+ }
+ //MCUCR&=~(1<<ISC01);
+ asm("SLEEP");
+ }
+
+
+}
\ No newline at end of file
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Atmel Studio Solution File, Format Version 11.00
+Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "DS18B20_DS2438", "DS18B20_DS2438_6_2.cproj", "{7A5672FE-8226-4158-B931-E1F36B9A8858}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|AVR = Debug|AVR
+ Release|AVR = Release|AVR
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.ActiveCfg = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.Build.0 = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.ActiveCfg = Release|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.Build.0 = Release|AVR
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectVersion>6.2</ProjectVersion>
+ <ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
+ <ProjectGuid>{7a5672fe-8226-4158-b931-e1f36b9a8858}</ProjectGuid>
+ <avrdevice>ATtiny84A</avrdevice>
+ <avrdeviceseries>none</avrdeviceseries>
+ <OutputType>Executable</OutputType>
+ <Language>C</Language>
+ <OutputFileName>$(MSBuildProjectName)</OutputFileName>
+ <OutputFileExtension>.elf</OutputFileExtension>
+ <OutputDirectory>$(MSBuildProjectDirectory)\$(Configuration)</OutputDirectory>
+ <AssemblyName>DS18B20_DS2438</AssemblyName>
+ <Name>DS18B20_DS2438</Name>
+ <RootNamespace>DS18B20_DS2438</RootNamespace>
+ <ToolchainFlavour>Native</ToolchainFlavour>
+ <KeepTimersRunning>true</KeepTimersRunning>
+ <OverrideVtor>false</OverrideVtor>
+ <CacheFlash>true</CacheFlash>
+ <ProgFlashFromRam>true</ProgFlashFromRam>
+ <RamSnippetAddress>0x20000000</RamSnippetAddress>
+ <UncachedRange />
+ <preserveEEPROM>true</preserveEEPROM>
+ <OverrideVtorValue>exception_table</OverrideVtorValue>
+ <BootSegment>2</BootSegment>
+ <eraseonlaunchrule>1</eraseonlaunchrule>
+ <AsfFrameworkConfig>
+ <framework-data xmlns="">
+ <options />
+ <configurations />
+ <files />
+ <documentation help="" />
+ <offline-documentation help="" />
+ <dependencies>
+ <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.19.0" />
+ </dependencies>
+ </framework-data>
+ </AsfFrameworkConfig>
+ <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
+ <com_atmel_avrdbg_tool_atmelice>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>debugWIRE</InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.atmelice</ToolType>
+ <ToolNumber>J41800000779</ToolNumber>
+ <ToolName>Atmel-ICE</ToolName>
+ </com_atmel_avrdbg_tool_atmelice>
+ <avrtoolinterface>debugWIRE</avrtoolinterface>
+ <com_atmel_avrdbg_tool_simulator>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>
+ </InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.simulator</ToolType>
+ <ToolNumber>
+ </ToolNumber>
+ <ToolName>Simulator</ToolName>
+ </com_atmel_avrdbg_tool_simulator>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>NDEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.optimization.level>Optimize for size (-Os)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="..\common\I2C\SHT2x.c">
+ <SubType>compile</SubType>
+ <Link>SHT2x.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\MAX44009.c">
+ <SubType>compile</SubType>
+ <Link>MAX44009.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\USI_TWI_Master.c">
+ <SubType>compile</SubType>
+ <Link>USI_TWI_Master.c</Link>
+ </Compile>
+ <Compile Include="DS18B20_DS2438.c">
+ <SubType>compile</SubType>
+ </Compile>
+ <Compile Include="OWDS18B20_DS2438.S">
+ <SubType>compile</SubType>
+ </Compile>
+ </ItemGroup>
+ <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />
+</Project>
\ No newline at end of file
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Atmel Studio Solution File, Format Version 11.00
+VisualStudioVersion = 14.0.23107.0
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "DS18B20_MAX44009_DS2438_SHT", "DS18B20_MAX44009_DS2438_SHT.cproj", "{7A5672FE-8226-4158-B931-E1F36B9A8858}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|AVR = Debug|AVR
+ Release|AVR = Release|AVR
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.ActiveCfg = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Debug|AVR.Build.0 = Debug|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.ActiveCfg = Release|AVR
+ {7A5672FE-8226-4158-B931-E1F36B9A8858}.Release|AVR.Build.0 = Release|AVR
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectVersion>7.0</ProjectVersion>
+ <ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
+ <ProjectGuid>{7a5672fe-8226-4158-b931-e1f36b9a8858}</ProjectGuid>
+ <avrdevice>ATtiny84A</avrdevice>
+ <avrdeviceseries>none</avrdeviceseries>
+ <OutputType>Executable</OutputType>
+ <Language>C</Language>
+ <OutputFileName>$(MSBuildProjectName)</OutputFileName>
+ <OutputFileExtension>.elf</OutputFileExtension>
+ <OutputDirectory>$(MSBuildProjectDirectory)\$(Configuration)</OutputDirectory>
+ <AssemblyName>DS18B20_DS2438</AssemblyName>
+ <Name>DS18B20_MAX44009_DS2438_SHT</Name>
+ <RootNamespace>DS18B20_DS2438</RootNamespace>
+ <ToolchainFlavour>Native</ToolchainFlavour>
+ <KeepTimersRunning>true</KeepTimersRunning>
+ <OverrideVtor>false</OverrideVtor>
+ <CacheFlash>true</CacheFlash>
+ <ProgFlashFromRam>true</ProgFlashFromRam>
+ <RamSnippetAddress>0x20000000</RamSnippetAddress>
+ <UncachedRange />
+ <preserveEEPROM>true</preserveEEPROM>
+ <OverrideVtorValue>exception_table</OverrideVtorValue>
+ <BootSegment>2</BootSegment>
+ <eraseonlaunchrule>1</eraseonlaunchrule>
+ <AsfFrameworkConfig>
+ <framework-data xmlns="">
+ <options />
+ <configurations />
+ <files />
+ <documentation help="" />
+ <offline-documentation help="" />
+ <dependencies>
+ <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.19.0" />
+ </dependencies>
+ </framework-data>
+ </AsfFrameworkConfig>
+ <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
+ <com_atmel_avrdbg_tool_atmelice>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>debugWIRE</InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.atmelice</ToolType>
+ <ToolNumber>J41800000779</ToolNumber>
+ <ToolName>Atmel-ICE</ToolName>
+ </com_atmel_avrdbg_tool_atmelice>
+ <avrtoolinterface>debugWIRE</avrtoolinterface>
+ <com_atmel_avrdbg_tool_simulator>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>
+ </InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.simulator</ToolType>
+ <ToolNumber>
+ </ToolNumber>
+ <ToolName>Simulator</ToolName>
+ </com_atmel_avrdbg_tool_simulator>
+ <ExternalProgrammingToolCommand />
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
+ <ToolchainSettings>
+ <AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+ </AvrGcc>
+ </ToolchainSettings>
+ </PropertyGroup>
+ <ItemGroup>
+ <Compile Include="..\common\I2C\SHT2x.c">
+ <SubType>compile</SubType>
+ <Link>SHT2x.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\MAX44009.c">
+ <SubType>compile</SubType>
+ <Link>MAX44009.c</Link>
+ </Compile>
+ <Compile Include="D:\oc\dev\owSlave2\common\I2C\USI_TWI_Master.c">
+ <SubType>compile</SubType>
+ <Link>USI_TWI_Master.c</Link>
+ </Compile>
+ <Compile Include="DS18B20_DS2438.c">
+ <SubType>compile</SubType>
+ </Compile>
+ <Compile Include="OWDS18B20_DS2438.S">
+ <SubType>compile</SubType>
+ </Compile>
+ </ItemGroup>
+ <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />
+</Project>
\ No newline at end of file
--- /dev/null
+
+// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+// * Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the
+// distribution.
+// * All advertising materials mentioning features or use of this
+// software must display the following acknowledgement: This product
+// includes software developed by tm3d.de and its contributors.
+// * Neither the name of tm3d.de nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#define _CHANGEABLE_ID_
+#define _ZERO_POLLING_
+#define _DB_
+
+#include "../common/OWConfig.s"
+#include "../common/OWCRC8.s"
+
+.extern pack1,8
+
+//.extern am2302_temp,2
+
+#if defined(__AVR_ATtiny25__)
+.extern pack2,16
+#else
+.extern pack2,64
+#endif
+.extern am2302_temp,2
+.extern am2302_hum,2
+.comm block,1 ; Block der augegeben, geschrieben wird (Parameter von READ/WRITE Scratchpad)
+
+
+.macro CHIP_INIT
+Init_EEPROM_read:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp Init_EEPROM_read
+ ldi r_temp,0
+ out _SFR_IO_ADDR(EEARH), r_temp
+ ldi r_temp,2
+ out _SFR_IO_ADDR(EEARL), r_temp
+ sbi _SFR_IO_ADDR(EECR), EERE
+ in r_temp,_SFR_IO_ADDR(EEDR)
+ sbrs r_temp,7
+ rcall hrc_recall_eeprom_func1
+.endm
+
+.macro COMMAND_TABLE
+ rjmp h_readscratchpad1
+ rjmp h_writescratchpad1
+ rjmp h_readscratchpad_adr2
+ rjmp h_readscratchpad2
+ rjmp h_writescratchpad_adr2
+ rjmp h_writescratchpad2
+.endm
+
+#include "../common/OWRomFunctionsDual.s"
+#include "../common/OWTimerInterrupt.s"
+
+
+
+; Ab hier Geraeteabhaenging
+#define OW_READ_SCRATCHPAD1 OW_FIRST_COMMAND+0
+#define OW_WRITE_SCRATCHPAD1 OW_FIRST_COMMAND+1
+#define OW_READ_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+2
+#define OW_READ_SCRATCHPAD2 OW_FIRST_COMMAND+3
+#define OW_WRITE_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+4
+#define OW_WRITE_SCRATCHPAD2 OW_FIRST_COMMAND+5
+
+
+;---------------------------------------------------
+; READ COMMAND and start operation
+;---------------------------------------------------
+
+
+h_readcommand1:
+ clr r_bytep
+#ifndef _DIS_FLASH_
+ FLASH_COMMANDS ; muss zu erst sein....
+#endif
+ cjmp 0xBE,hrc_set_readscratchpad1
+ cjmp 0x4E,hrc_set_writescratchpad1
+ cjmp 0x44,hrc_set_convertT1
+ cjmp 0x48,hrc_copy_scratchpad1
+ cjmp 0xB8,hrc_recall_eeprom1
+ FW_CONFIG_INFO1
+#ifdef _CHANGEABLE_ID_
+ CHANGE_ID_COMMANDS
+#endif
+ ldi r_mode,OW_SLEEP
+ rjmp handle_end
+
+hrc_set_readscratchpad1:
+ ldi r_mode,OW_READ_SCRATCHPAD1
+ ldi r_sendflag,1
+ CRCInit2
+ rjmp h_readscratchpad1
+
+hrc_set_writescratchpad1:
+ ldi r_mode,OW_WRITE_SCRATCHPAD1
+ ldi r_bytep,2 ;start to write in 2
+ rjmp handle_end
+
+hrc_recall_eeprom1:
+ rcall hrc_recall_eeprom_func1
+ rjmp handle_end
+
+
+
+hrc_set_convertT1:
+ ldi r_temp,1
+ sts gcontrol,r_temp
+
+ rjmp handle_end_sleep
+
+
+hrc_copy_scratchpad1:
+ ldi r_bytep,2
+ configZ pack1,r_bytep
+ clr r_bytep
+hrc_copy_scratchpad_EEPROM_write1:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp hrc_copy_scratchpad_EEPROM_write1
+ ldi r_temp, (0<<EEPM1)|(0<<EEPM0)
+ out _SFR_IO_ADDR(EECR), r_temp
+ ldi r_temp,0
+ out _SFR_IO_ADDR(EEARH),r_temp
+ out _SFR_IO_ADDR(EEARL), r_bytep
+ ld r_rwbyte,Z+
+ out _SFR_IO_ADDR(EEDR), r_rwbyte
+ sbi _SFR_IO_ADDR(EECR), EEMPE
+ sbi _SFR_IO_ADDR(EECR), EEPE
+ inc r_bytep
+ cpi r_bytep,3
+ brne hrc_copy_scratchpad_EEPROM_write1
+ rjmp handle_end
+
+
+hrc_recall_eeprom_func1:
+ ldi r_bytep,2
+ configZ pack1,r_bytep
+ clr r_bytep
+ clr r_temp
+hrc_recall_eeprom_EEPROM_read1:
+ sbic _SFR_IO_ADDR(EECR), EEPE
+ rjmp hrc_recall_eeprom_EEPROM_read1
+ out _SFR_IO_ADDR(EEARH), r_temp
+ out _SFR_IO_ADDR(EEARL), r_bytep
+ sbi _SFR_IO_ADDR(EECR), EERE
+ in r_rwbyte,_SFR_IO_ADDR(EEDR)
+ st Z+,r_rwbyte
+ inc r_bytep
+ cpi r_bytep,3
+ brne hrc_recall_eeprom_EEPROM_read1
+ ret
+
+
+
+
+
+
+;---------------------------------------------------
+; READ SCRATCHPAD
+;---------------------------------------------------
+
+h_readscratchpad1:
+ cpi r_bytep,8
+ breq h_readscratchpad_crc1
+ cpi r_bytep,9
+ breq h_readscratchpad_all1
+ configZ pack1,r_bytep
+ ld r_rwbyte,Z
+ rjmp h_readscratchpad_endc1
+h_readscratchpad_crc1:
+ lds r_rwbyte,crc
+h_readscratchpad_endc1:
+ inc r_bytep
+ ldi r_bcount,1
+ rjmp handle_end
+h_readscratchpad_all1:
+ rjmp handle_end_sleep
+
+
+
+
+
+;---------------------------------------------------
+; WRITE SCRATCHPAD
+;---------------------------------------------------
+
+h_writescratchpad1:
+ configZ pack1,r_bytep
+ inc r_bytep
+ cpi r_bytep,5
+ breq h_writescratchpad_all1
+ st Z,r_rwbyte
+ rjmp handle_end
+h_writescratchpad_all1:
+ ori r_rwbyte,0x1F ; Alle unteren Bits sind immer 1
+ st Z,r_rwbyte
+ rjmp handle_end_sleep
+
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+;*****************************************************************************************************************************************************************************************
+
+
+
+
+
+h_readcommand2:
+ clr r_bytep
+#ifndef _DIS_FLASH_
+ FLASH_COMMANDS ; muss zu erst sein....
+#endif
+ cset 0xBE,OW_READ_SCRATCHPAD_ADR2
+ cset 0x4E,OW_WRITE_SCRATCHPAD_ADR2
+ cjmp 0x44,hrc_set_convertT2
+ cjmp 0xB4,hrc_set_convertV2
+ FW_CONFIG_INFO2
+#ifdef _CHANGEABLE_ID_
+ CHANGE_ID_COMMANDS
+#endif
+ rjmp handle_end_sleep
+
+
+hrc_set_convertT2:
+ ldi r_temp,2
+ sts gcontrol,r_temp
+ lds r_temp,am2302_temp
+ sts pack2+1,r_temp
+ lds r_temp,am2302_temp+1
+ sts pack2+2,r_temp
+ rjmp handle_end_sleep
+hrc_set_convertV2:
+ lds r_temp,pack2
+ sbrs r_temp,3
+ rjmp hrc_set_convertVV2
+ ldi r_temp,0xF4
+ sts pack2+3,r_temp
+ ldi r_temp,0x01
+ sts pack2+4,r_temp
+ rjmp hrc_set_convertend2
+hrc_set_convertVV2:
+ ldi r_temp,3
+ sts gcontrol,r_temp
+ lds r_temp,am2302_hum
+ sts pack2+3,r_temp
+ lds r_temp,am2302_hum+1
+ sts pack2+4,r_temp
+hrc_set_convertend2:
+ rjmp handle_end_sleep
+
+
+
+;---------------------------------------------------
+; READ SCRATCHPAD
+;---------------------------------------------------
+
+h_readscratchpad_adr2:
+ lsl r_rwbyte
+ lsl r_rwbyte
+ lsl r_rwbyte
+#if defined(__AVR_ATtiny25__)
+ andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
+#endif
+ sts block,r_rwbyte
+ ldi r_sendflag,1
+ ldi r_mode,OW_READ_SCRATCHPAD2
+ CRCInit2
+h_readscratchpad2:
+ cpi r_bytep,8
+ breq h_readscratchpad_crc2
+ cpi r_bytep,9
+ breq h_readscratchpad_all2
+ lds r_temp,block
+ add r_temp,r_bytep
+ configZ pack2,r_temp
+ ld r_rwbyte,Z
+ rjmp handle_end_inc
+h_readscratchpad_crc2:
+ lds r_rwbyte,crc
+ rjmp handle_end_inc
+h_readscratchpad_all2:
+ rjmp handle_end_sleep
+
+
+
+
+;---------------------------------------------------
+; WRITE SCRATCHPAD
+;---------------------------------------------------
+h_writescratchpad_adr2:
+ lsl r_rwbyte
+ lsl r_rwbyte
+ lsl r_rwbyte
+#if defined(__AVR_ATtiny25__)
+ andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
+#endif
+ sts block,r_rwbyte
+ ldi r_mode,OW_WRITE_SCRATCHPAD2
+ ldi r_bcount,1
+ rjmp handle_end
+h_writescratchpad2:
+ cpi r_bytep,8
+ breq h_writescratchpad_all2
+ lds r_temp,block
+ add r_temp,r_bytep
+ configZ pack2,r_temp
+ st Z,r_rwbyte
+ rjmp handle_end_inc
+h_writescratchpad_all2:
+ rjmp handle_end_sleep
+
+
+
+
+
+
+
+
+
+#include "../common/OWPinInterrupt.s"
+.end
\ No newline at end of file
uint8_t owid[8]={0x26, 0xA2, 0xD9, 0x84, 0x00, 0x00, 0x05, 0x16};/**/
-uint8_t config_info[16]={0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+uint8_t config_info[16]={0x01,0x06, 0x05,0x08, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
extern uint8_t mode;
<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<SchemaVersion>2.0</SchemaVersion>
- <ProjectVersion>6.2</ProjectVersion>
+ <ProjectVersion>7.0</ProjectVersion>
<ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
<ProjectGuid>{91468d4f-8ae2-4c59-8a35-549c49e00934}</ProjectGuid>
<avrdevice>ATtiny84A</avrdevice>
<ToolName>Atmel-ICE</ToolName>
</com_atmel_avrdbg_tool_atmelice>
<avrtoolinterface>debugWIRE</avrtoolinterface>
+ <ExternalProgrammingToolCommand />
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
<ToolchainSettings>
<AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>NDEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize for size (-Os)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- </AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+</AvrGcc>
</ToolchainSettings>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
<ToolchainSettings>
<AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>DEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
- </AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+</AvrGcc>
</ToolchainSettings>
</PropertyGroup>
<ItemGroup>
-Microsoft Visual Studio Solution File, Format Version 11.00
+Microsoft Visual Studio Solution File, Format Version 12.00
# Atmel Studio Solution File, Format Version 11.00
+VisualStudioVersion = 14.0.23107.0
+MinimumVisualStudioVersion = 10.0.40219.1
Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "DS2450", "DS2450.cproj", "{7A5672FE-8226-4158-B931-E1F36B9A8858}"
EndProject
Global
extern void OWINIT();
uint8_t owid[8]={0x20, 0xA2, 0xD9, 0x84, 0x00, 0x16, 0x02, 0x5D};/**/
-uint8_t config_info[16]={0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+uint8_t config_info[16]={0x06,0x09,0x06,0x09,0x06,0x09,0x06,0x09,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
#if (owid>128)
#error "Variable not correct"
<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<SchemaVersion>2.0</SchemaVersion>
- <ProjectVersion>6.2</ProjectVersion>
+ <ProjectVersion>7.0</ProjectVersion>
<ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
<ProjectGuid>{7a5672fe-8226-4158-b931-e1f36b9a8858}</ProjectGuid>
<avrdevice>ATtiny84A</avrdevice>
</dependencies>
</framework-data>
</AsfFrameworkConfig>
- <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
+ <avrtool>com.atmel.avrdbg.tool.avrdragon</avrtool>
<com_atmel_avrdbg_tool_atmelice>
<ToolOptions>
<InterfaceProperties>
<ToolName>Atmel-ICE</ToolName>
</com_atmel_avrdbg_tool_atmelice>
<avrtoolinterface>debugWIRE</avrtoolinterface>
+ <ExternalProgrammingToolCommand />
+ <avrtoolserialnumber>00A20004766E</avrtoolserialnumber>
+ <avrdeviceexpectedsignature>0x1E930C</avrdeviceexpectedsignature>
+ <com_atmel_avrdbg_tool_avrdragon>
+ <ToolOptions>
+ <InterfaceProperties>
+ </InterfaceProperties>
+ <InterfaceName>debugWIRE</InterfaceName>
+ </ToolOptions>
+ <ToolType>com.atmel.avrdbg.tool.avrdragon</ToolType>
+ <ToolNumber>00A20004766E</ToolNumber>
+ <ToolName>AVR Dragon</ToolName>
+ </com_atmel_avrdbg_tool_avrdragon>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
<ToolchainSettings>
<AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>NDEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize for size (-Os)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- </AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+</AvrGcc>
</ToolchainSettings>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
<ToolchainSettings>
<AvrGcc>
- <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
- <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
- <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
- <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
- <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
- <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
- <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
- <avrgcc.compiler.symbols.DefSymbols>
- <ListValues>
- <Value>DEBUG</Value>
- </ListValues>
- </avrgcc.compiler.symbols.DefSymbols>
- <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
- <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
- <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
- <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
- <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
- <avrgcc.linker.libraries.Libraries>
- <ListValues>
- <Value>libm</Value>
- </ListValues>
- </avrgcc.linker.libraries.Libraries>
- <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
- </AvrGcc>
+ <avrgcc.common.Device>-mmcu=attiny84a -B "%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\gcc\dev\attiny84a"</avrgcc.common.Device>
+ <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
+ <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
+ <avrgcc.common.outputfiles.eep>True</avrgcc.common.outputfiles.eep>
+ <avrgcc.common.outputfiles.srec>True</avrgcc.common.outputfiles.srec>
+ <avrgcc.common.outputfiles.usersignatures>False</avrgcc.common.outputfiles.usersignatures>
+ <avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned>
+ <avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned>
+ <avrgcc.compiler.symbols.DefSymbols>
+ <ListValues>
+ <Value>DEBUG</Value>
+ </ListValues>
+ </avrgcc.compiler.symbols.DefSymbols>
+ <avrgcc.compiler.directories.IncludePaths>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\include</Value>
+ </ListValues>
+ </avrgcc.compiler.directories.IncludePaths>
+ <avrgcc.compiler.optimization.level>Optimize (-O1)</avrgcc.compiler.optimization.level>
+ <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
+ <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
+ <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
+ <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
+ <avrgcc.linker.libraries.Libraries>
+ <ListValues>
+ <Value>libm</Value>
+ </ListValues>
+ </avrgcc.linker.libraries.Libraries>
+ <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
+</AvrGcc>
</ToolchainSettings>
</PropertyGroup>
<ItemGroup>
lds r_temp,flashmarker
cpi r_temp,2
brne hrc_jmp_flasher_inc
- ldi r_temp,0xE0
+ ldi r_temp,0xC0
push r_temp
ldi r_temp,0x0E
push r_temp
sbic _SFR_IO_ADDR(PINA),PINA5
rjmp owinit_botest_end ;PINA5 nicht 0.... nicht verbunden
cbi _SFR_IO_ADDR(DDRA),PINA4
- ldi r_temp,0xE0
+ ldi r_temp,0xC0
push r_temp
ldi r_temp,0x0E
push r_temp
-avrdude -c usbasp -p t84 -U lfuse:w:0xE2:m -U hfuse:w:0xDF:m
+avrdude -c usbasp -p t84 -U lfuse:w:0xE2:m -U hfuse:w:0xDF:m -U efuse:w:0xFE:m
avrdude -c usbasp -p t84 -e -U flash:w:"../programmer/Debug/programmer.hex"
<PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
<ToolchainSettings>
<AvrAssembler>
- <avrasm.assembler.general.AdditionalIncludeDirectories>
- <ListValues>
- <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
- <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
- </ListValues>
- </avrasm.assembler.general.AdditionalIncludeDirectories>
- <avrasm.assembler.general.IncludeFile>tn84adef.inc</avrasm.assembler.general.IncludeFile>
-</AvrAssembler>
+
<avrasm.assembler.general.AdditionalIncludeDirectories>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
+ </ListValues>
+ </avrasm.assembler.general.AdditionalIncludeDirectories>
+
<avrasm.assembler.general.IncludeFile>tn84adef.inc</avrasm.assembler.general.IncludeFile>
+ </AvrAssembler>
</ToolchainSettings>
<OutputType>Executable</OutputType>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
<ToolchainSettings>
<AvrAssembler>
- <avrasm.assembler.general.AdditionalIncludeDirectories>
- <ListValues>
- <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
- <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
- <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
- </ListValues>
- </avrasm.assembler.general.AdditionalIncludeDirectories>
- <avrasm.assembler.general.IncludeFile>tn84adef.inc</avrasm.assembler.general.IncludeFile>
-</AvrAssembler>
+
<avrasm.assembler.general.AdditionalIncludeDirectories>
+ <ListValues>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
+ <Value>%24(PackRepoDir)\atmel\ATtiny_DFP\1.0.68\avrasm\inc</Value>
+ </ListValues>
+ </avrasm.assembler.general.AdditionalIncludeDirectories>
+
<avrasm.assembler.general.IncludeFile>tn84adef.inc</avrasm.assembler.general.IncludeFile>
+ </AvrAssembler>
</ToolchainSettings>
</PropertyGroup>
<ItemGroup>
tm3d / owSlave2.git / commitdiff