#include <avr/pgmspace.h>\r
#include "../common/I2C/USI_TWI_Master.h"\r
#include "../common/I2C/MAX44009.h"\r
-#include "../common/I2C/SHT2x.h"\r
+#include "../common/I2C/SHT2xV2.h"\r
+#include "../common/calibr.h"\r
+#include "../common/owSlave_tools.h"\r
\r
\r
-extern void OWINIT();\r
-extern void EXTERN_SLEEP();\r
-\r
+OWST_EXTERN_VARS\r
\r
uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/\r
uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/\r
uint8_t config_info1[26]={0x03,0x04, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x02,15,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};\r
uint8_t config_info2[26]={0x01,0x06, 0x05,0x08, 0x04,0x07, 0x00,0x00, 0x02,7,0x00,7,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};\r
\r
-\r
- \r
-#if (owid>128) \r
-#error "Variable not correct"\r
-#endif\r
-\r
-extern uint8_t mode;\r
-extern uint8_t gcontrol;\r
-extern uint8_t reset_indicator;\r
-extern uint8_t alarmflag;\r
-volatile uint8_t wdcounter=5;\r
-\r
-\r
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)\r
-ISR(WATCHDOG_vect) {\r
-#else\r
-ISR(WDT_vect) {\r
-#endif \r
- //sleep_disable(); // Disable Sleep on Wakeup\r
- wdcounter++;\r
- if (reset_indicator==1) reset_indicator++;\r
- else if (reset_indicator==2) mode=0;\r
-/* if (timeout==2) {\r
- DIS_TIMER;\r
- EN_OWINT;\r
- mode=OWM_SLEEP;\r
- }\r
- timeout++;*/\r
- //sleep_enable(); // Enable Sleep Mode\r
-\r
-}\r
-\r
-int testSW(void) {\r
- uint8_t r;\r
- DDRB&=~(1<<PORTB0); //Eingang\r
- __asm__ __volatile__ ("nop");\r
- PORTB|=(1<<PORTB0); //Pullup\r
- __asm__ __volatile__ ("nop");\r
- __asm__ __volatile__ ("nop");\r
- __asm__ __volatile__ ("nop");\r
- __asm__ __volatile__ ("nop");\r
- __asm__ __volatile__ ("nop");\r
- r=PINB&(1<<PORTB0);\r
- __asm__ __volatile__ ("nop");\r
- PORTB&=~(1<<PORTB0);\r
- __asm__ __volatile__ ("nop");\r
- DDRB|=(1<<PORTB0); //Eingang\r
- return (r==0);\r
- \r
+OWST_WDT_ISR\r
\r
-}\r
+OWST_TESTSW\r
\r
\r
typedef union {\r
volatile pack2_t pack2;\r
\r
\r
+volatile int16_t DS2438_2_TEMP;\r
+volatile uint16_t DS2438_2_VAD;\r
+volatile uint16_t DS2438_2_VDD=0x01F4;\r
\r
-\r
-volatile int16_t am2302_temp;\r
-volatile uint16_t am2302_hum;\r
-\r
-\r
-uint8_t userRegister[1];\r
-int16_t sRH,sT;\r
-volatile double temperatureC,humidityRH;\r
-volatile double l;\r
+double temperatureC,humidityRH;\r
+double l;\r
\r
uint8_t max_adr=0;\r
\r
int main(void){\r
- PRR|=(1<<PRADC); // adc for save Power\r
+ OWST_INIT_USI_ON\r
pack1.temp=0x0550;\r
pack1.config=0x7F;\r
pack1.TH=75;\r
pack1.rrFF=0xFF;\r
pack1.rr00=0;\r
pack1.rr10=0x10;\r
- PORTA=0xFF;\r
- PORTB=0xFF;\r
OWINIT();\r
-\r
- MCUCR &=~(1<<PUD); //All Pins Pullup...\r
- MCUCR |=(1<<BODS);\r
-\r
- WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)\r
- WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt\r
- (1<<WDP3) | (1<<WDP0); // Set Timeout to ~8 seconds\r
+ OWST_EN_PULLUP\r
+ OWST_WDR_CONFIG8\r
if (testSW()) {\r
- config_info2[5]=8;\r
+ config_info2[5]=12;\r
}else{\r
config_info2[5]=7;\r
}\r
- MCUSR=0;\r
sei();\r
USI_TWI_Master_Initialise();\r
if (checkMAX44009(0)) max_adr=0; else max_adr=1 ;\r
- SHT2x_SoftReset();\r
- SHT2x_ReadUserRegister(userRegister);\r
- //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;\r
- SHT2x_WriteUserRegister(userRegister); //write changed user reg\r
- // --- measure humidity with "Hold Master Mode (HM)" ---\r
- SHT2x_MeasurePoll(HUMIDITY, &sRH);\r
- // --- measure temperature with "Polling Mode" (no hold master) ---\r
- SHT2x_MeasurePoll(TEMP, &sT);\r
- //-- calculate humidity and temperature --\r
- //temperatureC = SHT2x_CalcTemperatureC(sT);\r
- //humidityRH = SHT2x_CalcRH(sRH);\r
+ _delay_ms(10);\r
\r
+ initSHT2x();\r
gcontrol=1;\r
sei();\r
- //DDRB|=(1<<PINB1);\r
while(1) {\r
if ((gcontrol&2)==2){\r
wdcounter=3;\r
}\r
\r
if (wdcounter>2) {\r
- //PORTB|=(1<<PINB1); //Dauer 440ms\r
- SHT2x_MeasurePoll(HUMIDITY, &sRH);\r
- // --- measure temperature with "Polling Mode" (no hold master) ---\r
- SHT2x_MeasurePoll(TEMP, &sT);\r
- //-- calculate humidity and temperature --\r
- temperatureC = SHT2x_CalcTemperatureC(sT)*10.0-2;\r
- humidityRH = SHT2x_CalcRH(sRH)*10.0+5;\r
- if (humidityRH>1000) humidityRH=1000;\r
- if (testSW()) {\r
- am2302_hum= humidityRH*10.0;\r
- am2302_temp=temperatureC*25.6;\r
- //\r
- config_info2[5]=8;\r
- \r
- }else{\r
- \r
- double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);\r
- //am2302_hum=0.318*hhum +76.0;\r
- am2302_hum=0.31*hhum +80;\r
- am2302_temp=temperatureC*25.6;\r
- //am2302_temp=am2302_temp-45;\r
- config_info2[5]=7;\r
+ getSHT2xHumTemp(&temperatureC,&humidityRH);\r
+ double RH=calibr_hum(temperatureC,-0.2,humidityRH)*10.0;\r
+ double TC =temperatureC *10.0-2;\r
+\r
+ if (testSW()) {\r
+ DS2438_2_VAD=RH;\r
+ DS2438_2_TEMP=TC*25.6;\r
+ //am2302_temp=am2302_temp-20;\r
+ config_info2[5]=12;\r
+ DS2438_2_VDD=0x01F4;\r
+ \r
+ }else{\r
+ \r
+ double hhum=(1.0546-0.000216*TC)*(RH);\r
+ //am2302_hum=0.318*hhum +76.0;\r
+ DS2438_2_VAD=0.31*hhum +80;\r
+ DS2438_2_TEMP=TC*25.6;\r
+ //am2302_temp=am2302_temp-20;\r
+ config_info2[5]=7;\r
+ DS2438_2_VDD=0x01F4;\r
}\r
wdcounter=0;\r
}\r
sei(); \r
EXTERN_SLEEP(); \r
}\r
- \r
-\r
- \r
-#if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)\r
- if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))\r
-#endif \r
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)\r
- if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))\r
-#endif\r
- {\r
-\r
- MCUCR|=(1<<SE)|(1<<SM1);\r
- MCUCR&=~(1<<ISC01);\r
- } else {\r
- MCUCR|=(1<<SE);\r
- MCUCR&=~(1<<SM1);\r
- }\r
- asm("SLEEP");\r
+ OWST_MAIN_END\r
}\r
\r
\r
tm3d / owSlave2.git / blobdiff