+++ /dev/null
-# Hey Emacs, this is a -*- makefile -*-
-
-# AVR-GCC Makefile template, derived from the WinAVR template (which
-# is public domain), believed to be neutral to any flavor of "make"
-# (GNU make, BSD make, SysV make)
-
-
-MCU = attiny84
-FORMAT = ihex
-TARGET =DS2423
-SRC = DS2423.c
-ASRC = ../common/OWDS2423.S
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-
-CFLAGS = -x c -funsigned-char -funsigned-bitfields -I. -O1 -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -Wall -std=gnu99 -MD -MP
-
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-
-
-#Additional libraries.
-
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-PRINTF_LIB =
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-SCANF_LIB =
-
-MATH_LIB = -lm
-
-# External memory options
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-#LDMAP = $(LDFLAGS) -Wl,-Map=$(TARGET).map,--cref
-#LDFLAGS = $(EXTMEMOPTS) $(LDMAP) $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-LDFLAGS = -Wl,--start-group -Wl,-lm -Wl,--end-group -Wl,--gc-sections -mmcu=$(MCU)
-
-# Programming support using avrdude. Settings and variables.
-
-#AVRDUDE_PROGRAMMER = stk500
-#AVRDUDE_PORT = /dev/term/a
-
-#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-#AVRDUDE_BASIC = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-#AVRDUDE_FLAGS = $(AVRDUDE_BASIC) $(AVRDUDE_NO_VERIFY) $(AVRDUDE_VERBOSE) $(AVRDUDE_ERASE_COUNTER)
-
-
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-NM = avr-nm
-#AVRDUDE = avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: build
-
-build: elf hex eep
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-#eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000
-
-
-coff: $(TARGET).elf
- $(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- $(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym
-
-.elf.hex:
- $(OBJCOPY) -O $(FORMAT) $< $@
-# $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
- $(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
- $(NM) -n $< > $@
-
-
-
-# Link: create ELF output file from object files.
-$(TARGET).elf: $(OBJ)
- $(CC) $(OBJ) --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-.c.o:
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-.c.s:
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-
-# Target: clean project.
-clean:
- $(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \
- $(TARGET).map $(TARGET).sym $(TARGET).lss \
- $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d)
-
-depend:
- if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \
- then \
- sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \
- $(MAKEFILE).$$$$ && \
- $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \
- fi
- echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \
- >> $(MAKEFILE); \
- $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE)
-
-.PHONY: all build elf hex eep lss sym program coff extcoff clean depend
-
-
tm3d / owSlave2.git / blobdiff