1 // Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
2 // All rights reserved.
4 // Redistribution and use in source and binary forms, with or without
5 // modification, are permitted provided that the following conditions are
8 // * Redistributions of source code must retain the above copyright
9 // notice, this list of conditions and the following disclaimer.
10 // * Redistributions in binary form must reproduce the above copyright
11 // notice, this list of conditions and the following disclaimer in the
12 // documentation and/or other materials provided with the
14 // * All advertising materials mentioning features or use of this
15 // software must display the following acknowledgement: This product
16 // includes software developed by tm3d.de and its contributors.
17 // * Neither the name of tm3d.de nor the names of its contributors may
18 // be used to endorse or promote products derived from this software
19 // without specific prior written permission.
21 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24 // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25 // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26 // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27 // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31 // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 #define F_CPU 8000000UL
35 #include <avr/interrupt.h>
36 #include <util/delay.h>
38 #include <avr/sleep.h>
39 #include <avr/pgmspace.h>
40 #include "../common/I2C/USI_TWI_Master.h"
41 #include "../common/I2C/SHT2x.h"
42 #include "../common/I2C/BMP280.h"
43 #include "../common/calibr.h"
46 extern void EXTERN_SLEEP();
49 uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/
50 uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/
51 uint8_t config_info1[16]={0x02,0x03, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
52 uint8_t config_info2[16]={0x01,0x06, 0x05,0x08, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
55 #error "Variable not correct"
59 extern uint8_t gcontrol;
60 extern uint8_t reset_indicator;
61 extern uint8_t alarmflag;
62 volatile uint8_t wdcounter=3;
65 #if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
71 //sleep_disable(); // Disable Sleep on Wakeup
73 if (reset_indicator==1) reset_indicator++;
74 else if (reset_indicator==2) mode=0;
81 //sleep_enable(); // Enable Sleep Mode
87 volatile uint8_t bytes[8];
98 volatile pack1_t pack1;
103 #if defined(__AVR_ATtiny25__)
104 volatile uint8_t bytes[16];
106 volatile uint8_t bytes[64];
111 uint16_t voltage; //4
112 uint16_t current; //6
113 uint8_t threshold; //8
115 uint8_t page1[8]; //9
116 #if defined(__AVR_ATtiny25__)
118 uint8_t page2[8]; //17
119 uint8_t page3[8]; //25
120 uint8_t page4[8]; //33
121 uint8_t page5[8]; //41
122 uint8_t page6[8]; //49
123 uint8_t page7[8]; //57
128 volatile pack2_t pack2;
133 volatile int16_t am2302_temp;
134 volatile uint16_t am2302_hum;
139 DDRB&=~(1<<PORTB0); //Eingang
140 __asm__ __volatile__ ("nop");
141 PORTB|=(1<<PORTB0); //Pullup
142 __asm__ __volatile__ ("nop");
143 __asm__ __volatile__ ("nop");
144 __asm__ __volatile__ ("nop");
145 __asm__ __volatile__ ("nop");
146 __asm__ __volatile__ ("nop");
148 __asm__ __volatile__ ("nop");
150 __asm__ __volatile__ ("nop");
151 DDRB|=(1<<PORTB0); //Eingang
157 uint8_t userRegister[1];
159 volatile double temperatureC,humidityRH;
165 PRR|=(1<<PRADC); // adc for save Power
167 PORTB=0xFF-(1<<PORTB0); //Schalter kann gegen Masse sein und zieht dann immer Strom
168 DDRB|=(1<<PORTB0); //Als Ausgang und 0
181 ACSR|=(1<<ACD); //Disable Comparator
182 ADCSRB|=(1<<ACME); //Disable Analog multiplexer
183 MCUCR &=~(1<<PUD); //All Pins Pullup...
184 //MCUCR &=~(1<<BODS);
187 WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)
188 WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt
189 (1<<WDP3) | (1<<WDP0); // Set Timeout to ~8 seconds
198 USI_TWI_Master_Initialise();
201 SHT2x_ReadUserRegister(userRegister);
202 //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;
203 SHT2x_WriteUserRegister(userRegister); //write changed user reg
204 // --- measure humidity with "Hold Master Mode (HM)" ---
205 //SHT2x_MeasurePoll(HUMIDITY, &sRH);
206 // --- measure temperature with "Polling Mode" (no hold master) ---
207 //SHT2x_MeasurePoll(TEMP, &sT);
208 //-- calculate humidity and temperature --
209 //temperatureC = SHT2x_CalcTemperatureC(sT);
210 //humidityRH = SHT2x_CalcRH(sRH);
221 SHT2x_MeasurePoll(HUMIDITY, &sRH);
222 // --- measure temperature with "Polling Mode" (no hold master) ---
223 SHT2x_MeasurePoll(TEMP, &sT);
224 //-- calculate humidity and temperature --
225 temperatureC = SHT2x_CalcTemperatureC(sT);
226 humidityRH = SHT2x_CalcRH(sRH);
227 humidityRH=calibr_hum(temperatureC,-0.45,humidityRH)*10.0;
228 temperatureC=temperatureC*10.0-4.5;
230 am2302_hum= humidityRH*10.0;
231 am2302_temp=temperatureC*25.6;
232 am2302_temp=am2302_temp-20;
237 double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);
238 //am2302_hum=0.318*hhum +76.0;
239 am2302_hum=0.31*hhum +80;
240 am2302_temp=temperatureC*25.6;
241 am2302_temp=am2302_temp-20;
249 bmp280ConvertInt(&t,&P,1);
255 if (t8>pack1.TH) af=1;
256 if (t8<=pack1.TL) af=1;
271 #if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
272 if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))
274 #if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
275 if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))
279 MCUCR|=(1<<SE)|(1<<SM1);
285 //MCUCR&=~(1<<ISC01);