-
-// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-// * Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the
-// distribution.
-// * All advertising materials mentioning features or use of this
-// software must display the following acknowledgement: This product
-// includes software developed by tm3d.de and its contributors.
-// * Neither the name of tm3d.de nor the names of its contributors may
-// be used to endorse or promote products derived from this software
-// without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#define _CHANGEABLE_ID_
-#define _ZERO_POLLING_
-#define _DB_
-
-#include "../common/OWConfig.s"
-#include "../common/OWCRC8.s"
-
-.extern pack1,8
-
-//.extern am2302_temp,2
-
-#if defined(__AVR_ATtiny25__)
-.extern pack2,16
-#else
-.extern pack2,64
-#endif
-.extern am2302_temp,2
-.extern am2302_hum,2
-.comm block,1 ; Block der augegeben, geschrieben wird (Parameter von READ/WRITE Scratchpad)
-
-
-.macro CHIP_INIT
-Init_EEPROM_read:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp Init_EEPROM_read
- ldi r_temp,0
- out _SFR_IO_ADDR(EEARH), r_temp
- ldi r_temp,2
- out _SFR_IO_ADDR(EEARL), r_temp
- sbi _SFR_IO_ADDR(EECR), EERE
- in r_temp,_SFR_IO_ADDR(EEDR)
- sbrs r_temp,7
- rcall hrc_recall_eeprom_func1
-.endm
-
-.macro COMMAND_TABLE
- rjmp h_readscratchpad1
- rjmp h_writescratchpad1
- rjmp h_convert_run1
- rjmp h_readscratchpad_adr2
- rjmp h_readscratchpad2
- rjmp h_writescratchpad_adr2
- rjmp h_writescratchpad2
-.endm
-
-#include "../common/OWRomFunctionsDual.s"
-#include "../common/OWTimerInterrupt.s"
-
-
-
-; Ab hier Geraeteabhaenging
-#define OW_READ_SCRATCHPAD1 OW_FIRST_COMMAND+0
-#define OW_WRITE_SCRATCHPAD1 OW_FIRST_COMMAND+1
-#define OW_CONVERT_RUN1 OW_FIRST_COMMAND+2
-#define OW_READ_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+3
-#define OW_READ_SCRATCHPAD2 OW_FIRST_COMMAND+4
-#define OW_WRITE_SCRATCHPAD_ADR2 OW_FIRST_COMMAND+5
-#define OW_WRITE_SCRATCHPAD2 OW_FIRST_COMMAND+6
-
-
-
-;---------------------------------------------------
-; READ COMMAND and start operation
-;---------------------------------------------------
-
-
-h_readcommand1:
- clr r_bytep
-#ifndef _DIS_FLASH_
- FLASH_COMMANDS ; muss zu erst sein....
-#endif
- cjmp 0xBE,hrc_set_readscratchpad1
- cjmp 0x4E,hrc_set_writescratchpad1
- cjmp 0x44,hrc_set_convertT1
- cjmp 0x48,hrc_copy_scratchpad1
- cjmp 0xB8,hrc_recall_eeprom1
- FW_CONFIG_INFO1
-#ifdef _CHANGEABLE_ID_
- CHANGE_ID_COMMANDS
-#endif
- ldi r_mode,OW_SLEEP
- rjmp handle_end
-
-hrc_set_readscratchpad1:
- ldi r_mode,OW_READ_SCRATCHPAD1
- ldi r_sendflag,1
- CRCInit2
- rjmp h_readscratchpad1
-
-hrc_set_writescratchpad1:
- ldi r_mode,OW_WRITE_SCRATCHPAD1
- ldi r_bytep,2 ;start to write in 2
- rjmp handle_end
-
-hrc_recall_eeprom1:
- rcall hrc_recall_eeprom_func1
- rjmp handle_end
-
-
-
-hrc_set_convertT1:
- ldi r_temp,1
- sts gcontrol,r_temp
-
- ldi r_mode,OW_CONVERT_RUN1
- ldi r_sendflag,3 ;set bit 0 and 1 for no zero polling
-h_convert_run1:
- ldi r_bcount,0
- ldi r_rwbyte,0
- rjmp handle_end_no_bcount
-
-
-hrc_copy_scratchpad1:
- ldi r_bytep,2
- configZ pack1,r_bytep
- clr r_bytep
-hrc_copy_scratchpad_EEPROM_write1:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp hrc_copy_scratchpad_EEPROM_write1
- ldi r_temp, (0<<EEPM1)|(0<<EEPM0)
- out _SFR_IO_ADDR(EECR), r_temp
- ldi r_temp,0
- out _SFR_IO_ADDR(EEARH),r_temp
- out _SFR_IO_ADDR(EEARL), r_bytep
- ld r_rwbyte,Z+
- out _SFR_IO_ADDR(EEDR), r_rwbyte
- sbi _SFR_IO_ADDR(EECR), EEMPE
- sbi _SFR_IO_ADDR(EECR), EEPE
- inc r_bytep
- cpi r_bytep,3
- brne hrc_copy_scratchpad_EEPROM_write1
- rjmp handle_end
-
-
-hrc_recall_eeprom_func1:
- ldi r_bytep,2
- configZ pack1,r_bytep
- clr r_bytep
- clr r_temp
-hrc_recall_eeprom_EEPROM_read1:
- sbic _SFR_IO_ADDR(EECR), EEPE
- rjmp hrc_recall_eeprom_EEPROM_read1
- out _SFR_IO_ADDR(EEARH), r_temp
- out _SFR_IO_ADDR(EEARL), r_bytep
- sbi _SFR_IO_ADDR(EECR), EERE
- in r_rwbyte,_SFR_IO_ADDR(EEDR)
- st Z+,r_rwbyte
- inc r_bytep
- cpi r_bytep,3
- brne hrc_recall_eeprom_EEPROM_read1
- ret
-
-
-
-
-
-
-;---------------------------------------------------
-; READ SCRATCHPAD
-;---------------------------------------------------
-
-h_readscratchpad1:
- cpi r_bytep,8
- breq h_readscratchpad_crc1
- cpi r_bytep,9
- breq h_readscratchpad_all1
- configZ pack1,r_bytep
- ld r_rwbyte,Z
- rjmp h_readscratchpad_endc1
-h_readscratchpad_crc1:
- lds r_rwbyte,crc
-h_readscratchpad_endc1:
- inc r_bytep
- ldi r_bcount,1
- rjmp handle_end
-h_readscratchpad_all1:
- rjmp handle_end_sleep
-
-
-
-
-
-;---------------------------------------------------
-; WRITE SCRATCHPAD
-;---------------------------------------------------
-
-h_writescratchpad1:
- configZ pack1,r_bytep
- inc r_bytep
- cpi r_bytep,5
- breq h_writescratchpad_all1
- st Z,r_rwbyte
- rjmp handle_end
-h_writescratchpad_all1:
- ori r_rwbyte,0x1F ; Alle unteren Bits sind immer 1
- st Z,r_rwbyte
- rjmp handle_end_sleep
-
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-;*****************************************************************************************************************************************************************************************
-
-
-
-
-
-h_readcommand2:
- clr r_bytep
-#ifndef _DIS_FLASH_
- FLASH_COMMANDS ; muss zu erst sein....
-#endif
- cset 0xBE,OW_READ_SCRATCHPAD_ADR2
- cset 0x4E,OW_WRITE_SCRATCHPAD_ADR2
- cjmp 0x44,hrc_set_convertT2
- cjmp 0xB4,hrc_set_convertV2
- FW_CONFIG_INFO2
-#ifdef _CHANGEABLE_ID_
- CHANGE_ID_COMMANDS
-#endif
- rjmp handle_end_sleep
-
-
-hrc_set_convertT2:
- ldi r_temp,2
- sts gcontrol,r_temp
- lds r_temp,am2302_temp
- sts pack2+1,r_temp
- lds r_temp,am2302_temp+1
- sts pack2+2,r_temp
- rjmp handle_end_sleep
-hrc_set_convertV2:
- lds r_temp,pack2
- sbrs r_temp,3
- rjmp hrc_set_convertVV2
- ldi r_temp,0xF4
- sts pack2+3,r_temp
- ldi r_temp,0x01
- sts pack2+4,r_temp
- rjmp hrc_set_convertend2
-hrc_set_convertVV2:
- ldi r_temp,3
- sts gcontrol,r_temp
- lds r_temp,am2302_hum
- sts pack2+3,r_temp
- lds r_temp,am2302_hum+1
- sts pack2+4,r_temp
-hrc_set_convertend2:
- rjmp handle_end_sleep
-
-
-
-;---------------------------------------------------
-; READ SCRATCHPAD
-;---------------------------------------------------
-
-h_readscratchpad_adr2:
- lsl r_rwbyte
- lsl r_rwbyte
- lsl r_rwbyte
-#if defined(__AVR_ATtiny25__)
- andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
-#endif
- sts block,r_rwbyte
- ldi r_sendflag,1
- ldi r_mode,OW_READ_SCRATCHPAD2
- CRCInit2
-h_readscratchpad2:
- cpi r_bytep,8
- breq h_readscratchpad_crc2
- cpi r_bytep,9
- breq h_readscratchpad_all2
- lds r_temp,block
- add r_temp,r_bytep
- configZ pack2,r_temp
- ld r_rwbyte,Z
- rjmp handle_end_inc
-h_readscratchpad_crc2:
- lds r_rwbyte,crc
- rjmp handle_end_inc
-h_readscratchpad_all2:
- rjmp handle_end_sleep
-
-
-
-
-;---------------------------------------------------
-; WRITE SCRATCHPAD
-;---------------------------------------------------
-h_writescratchpad_adr2:
- lsl r_rwbyte
- lsl r_rwbyte
- lsl r_rwbyte
-#if defined(__AVR_ATtiny25__)
- andi r_rwbyte,0x01 ;nur Page 0 und 1 und das immer wiederholen
-#endif
- sts block,r_rwbyte
- ldi r_mode,OW_WRITE_SCRATCHPAD2
- ldi r_bcount,1
- rjmp handle_end
-h_writescratchpad2:
- cpi r_bytep,8
- breq h_writescratchpad_all2
- lds r_temp,block
- add r_temp,r_bytep
- configZ pack2,r_temp
- st Z,r_rwbyte
- rjmp handle_end_inc
-h_writescratchpad_all2:
- rjmp handle_end_sleep
-
-
-
-
-
-
-
-
-
-#include "../common/OWPinInterrupt.s"
-.end
\ No newline at end of file