+++ /dev/null
-
-// Copyright (c) 2015, Tobias Mueller tm(at)tm3d.de
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-// * Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the
-// distribution.
-// * All advertising materials mentioning features or use of this
-// software must display the following acknowledgement: This product
-// includes software developed by tm3d.de and its contributors.
-// * Neither the name of tm3d.de nor the names of its contributors may
-// be used to endorse or promote products derived from this software
-// without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#define F_CPU 8000000UL
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/wdt.h>
-#include <avr/sleep.h>
-#include <avr/pgmspace.h>
-#include "../common/I2C/USI_TWI_Master.h"
-#include "../common/I2C/MAX44009.h"
-#include "../common/I2C/SHT2x.h"
-
-
-extern void OWINIT();
-
-
-
-uint8_t owid1[8]={0x28, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x18};/**/
-uint8_t owid2[8]={0x26, 0xA3, 0xD9, 0x84, 0x00, 0x16, 0x05, 0x67};/**/
-uint8_t config_info1[16]={0x03,0x04, 0x00,0x00, 0x00,0x00, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-uint8_t config_info2[16]={0x01,0x06, 0x05,0x00, 0x04,0x07, 0x00,0x00, 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-
-#if (owid>128)
-#error "Variable not correct"
-#endif
-
-extern uint8_t mode;
-extern uint8_t gcontrol;
-extern uint8_t reset_indicator;
-extern uint8_t alarmflag;
-volatile uint8_t wdcounter;
-
-
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
-ISR(WATCHDOG_vect) {
-#else
-ISR(WDT_vect) {
-#endif
- //sleep_disable(); // Disable Sleep on Wakeup
- wdcounter++;
- if (reset_indicator==1) reset_indicator++;
- else if (reset_indicator==2) mode=0;
-/* if (timeout==2) {
- DIS_TIMER;
- EN_OWINT;
- mode=OWM_SLEEP;
- }
- timeout++;*/
- //sleep_enable(); // Enable Sleep Mode
-
-}
-
-
-typedef union {
- volatile uint8_t bytes[8];
- struct {
- uint16_t temp; //0
- uint8_t TH; //2
- uint8_t TL; //3
- uint8_t config; //4
- uint8_t rrFF; //5
- uint8_t rr00; //6
- uint8_t rr10; //7
- };
-} pack1_t;
-volatile pack1_t pack1;
-
-
-
-typedef union {
- #if defined(__AVR_ATtiny25__)
- volatile uint8_t bytes[16];
- #else
- volatile uint8_t bytes[64];
- #endif
- struct {
- uint8_t status; //1
- int16_t temp; //2
- uint16_t voltage; //4
- uint16_t current; //6
- uint8_t threshold; //8
-
- uint8_t page1[8]; //9
- #if defined(__AVR_ATtiny25__)
- #else
- uint8_t page2[8]; //17
- uint8_t page3[8]; //25
- uint8_t page4[8]; //33
- uint8_t page5[8]; //41
- uint8_t page6[8]; //49
- uint8_t page7[8]; //57
- //uint8_t crc; //65
- #endif
- };
-} pack2_t;
-volatile pack2_t pack2;
-
-
-
-
-volatile int16_t am2302_temp;
-volatile uint16_t am2302_hum;
-
-
-uint8_t userRegister[1];
-int16_t sRH,sT;
-volatile double temperatureC,humidityRH;
-volatile double l;
-
-
-int main(void){
- PRR|=(1<<PRADC); // adc for save Power
- pack1.temp=0x0550;
- pack1.config=0x7F;
- pack1.TH=75;
- pack1.TL=70;
- pack1.rrFF=0xFF;
- pack1.rr00=0;
- pack1.rr10=0x10;
- PORTA=0xFF;
- PORTB=0xFF;
- OWINIT();
-
- MCUCR &=~(1<<PUD); //All Pins Pullup...
- MCUCR |=(1<<BODS);
-
- WDTCSR |= ((1<<WDCE) ); // Enable the WD Change Bit//| (1<<WDE)
- WDTCSR |= (1<<WDIE) | // Enable WDT Interrupt
- (1<<WDP2) | (1<<WDP1); // Set Timeout to ~1 seconds
-
- MCUSR=0;
- USI_TWI_Master_Initialise();
- SHT2x_SoftReset();
- SHT2x_ReadUserRegister(userRegister);
- //(userRegister & ~SHT2x_RES_MASK) | SHT2x_RES_10_13BIT;
- SHT2x_WriteUserRegister(userRegister); //write changed user reg
- // --- measure humidity with "Hold Master Mode (HM)" ---
- SHT2x_MeasurePoll(HUMIDITY, &sRH);
- // --- measure temperature with "Polling Mode" (no hold master) ---
- SHT2x_MeasurePoll(TEMP, &sT);
- //-- calculate humidity and temperature --
- temperatureC = SHT2x_CalcTemperatureC(sT);
- humidityRH = SHT2x_CalcRH(sRH);
-
- gcontrol=1;
- sei();
- while(1) {
- if (wdcounter>0) {
- SHT2x_MeasurePoll(HUMIDITY, &sRH);
- // --- measure temperature with "Polling Mode" (no hold master) ---
- SHT2x_MeasurePoll(TEMP, &sT);
- //-- calculate humidity and temperature --
- temperatureC = SHT2x_CalcTemperatureC(sT)*10.0;
- humidityRH = SHT2x_CalcRH(sRH)*10.0;
- double hhum=(1.0546-0.000216*temperatureC)*(humidityRH);
- am2302_hum=0.318*hhum +76.0;
- am2302_temp=temperatureC*25.6;
- wdcounter=0;
- }
-
- if (gcontrol==1) {
- l=MAX44009getlux();
- if (l<0.030) l=0.030; //Darf nicht 0 sein. minimum -35°C Sensor minimum 0.045
- //double l=1000;
- l=log(l)*10*16;
- uint16_t w=l;
- uint8_t t8=w>>4;
- uint8_t af=0;
- if (t8>pack1.TH) af=1;
- if (t8<=pack1.TL) af=1;
- cli();
- pack1.temp=w;
- //pack.temp++;
- alarmflag=af;
- sei();
- gcontrol=0;
- }
- if ((gcontrol==2)||(gcontrol==3)) {
- gcontrol=0;
-
- }
-
-
-#if defined(__AVR_ATtiny25__)||defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
- if (((TIMSK & (1<<TOIE0))==0)&& (mode==0))
-#endif
-#if defined(__AVR_ATtiny24__)||defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) ||defined(__AVR_ATtiny24A__)||defined(__AVR_ATtiny44A__) || defined(__AVR_ATtiny84A__)
- if (((TIMSK0 & (1<<TOIE0))==0)&& (mode==0))
-#endif
- {
-
- MCUCR|=(1<<SE)|(1<<SM1);
- MCUCR&=~(1<<ISC01);
- } else {
- MCUCR|=(1<<SE);
- MCUCR&=~(1<<SM1);
- }
- //MCUCR&=~(1<<ISC01);
- asm("SLEEP");
- }
-
-
-}
\ No newline at end of file
tm3d / owSlave2.git / blobdiff